rehydrate5503

Hi folks,

I want to refinish and paint my kitchen cabinets, but before touching the doors I want to ask opinions on how to repair this peeling on edges of 3 cabinets. Looks like steam from the range and kettle did this.

I was thinking to trim off the excess bit that has peeled and expanded, then sand down and fill with wood/general filler before painting with bullseye 123. Is there a better approach?

Hello, I’m planning a rather large trip later this year and have been searching for something to help me plan and organize. I’ve come across a few apps that are not exactly privacy friendly, like TripIt and Wanderlog.

Does anyone know of any self hosted or otherwise open source alternatives to these apps?

Hi everyone,

I’m at my wits end here getting port forwarding working on my setup with Nginx Proxy Manager (NPM) and OPNsense.

I recently upgraded my networking gear, and everything is working great, I’m loving OPNsense and 10G networking. I’ve had the same setup for port forwarding for years and never had issues, the main change was the addition of OPNsense and a switch.

Previous setup (I realize this wasn’t the best):

ISP modem -> DHCPv4 with ports 80/443 forwarded to ASUS wireless router WAN -> DHCPv4 with ports 80/443 forwarded to VM on proxmox running NPM -> NPM set up with hosts to proxy services on other VMs/server.

This (or a variation thereof) has all been working great for years, along with ddns set up as I have a dynamic IP.

New setup:

ISP modem -> DHCP off with ports 80/443 forwarded to OPNsense WAN via MAC address -> OPNsense NAT-Port Forwarding set up to the NPM host/port, rest is the same as before.

The settings for the port forward are the standard I’ve found in guides. WAN address, any source/port, redirect to NPM host and ports. Tried the domain I usually use, no luck. Port checker shows the ports are closed.

Tried the following:

1. DMZ on the ISP modem keeping WAN IP default/automatic and adding OPNsense to the DMZ, no change.
2. Advanced DMZ on ISP, WAN is the external IP, no change
3. Same as 2, but changed OPNsense WAN settings from DHCPv4 to PPPoE, and added the ISP login info. Received new IP, updated ddns, still no change.
4. Checked over port forwarding settings, enabled NAT reflection, still nothing.

I’m between all these steps, I rebooted OPNsense, proxmox, switches, etc.

Any ideas on what I could try for next steps? All of the local networking and external connections work awesome, it’s just the port forwarding as the last piece. Thanks!

Edit 2023-01-03:

I finally solved this, turned out the OPNSense and NPM configuration was all correct.

The problem was a glitch in the docker compose/portainer. I had my ports in docker compose set to 80:80/443:443, but when the container was deployed, it assigned 1880:80/18443:443 because of…reasons, and I didn’t notice until going through it all line by line 🤦.

Redeploying the stack/container didn’t solve it, so I changed the time zone to another city, redeployed and viola, everything works perfect as it should!

Hi,

I’ve been running Linux for some time, currently on Nobara and happy. Running it on a 1TB NVME, and a second 1TB NVME drive for extra storage for games, etc., both at gen 3.

I find myself running out of room and just picked up 2TB and 1TB NVME drives, both gen 4, and am thinking as to what the best partition layout would be. The 2x1TB gen 3 will be moved to my NAS as a cache pool.

The PC is used for gaming, photo/video editing and web development.

I guess options would be:

1. OS on 2TB, and the 1TB for extra storage, call it a day.
2. OS on 1TB, and the 2TB for extra storage
3. Divy up the 1TB to have a partition for /, another for /home and another for /var and maybe another for games, then on the 2TB have one big partition for games and scratch disk for videos.
4. Same as option 3 but swap the drives around.

What would YOU do in this situation? I’m leaning towards option 3 or a variation there of, as it gives versatility to hop to a new distro if I want relatively easy, and one big partition for game storage/video scratch.

My mobo only supports 2xNVME drives unfortunately (regret not spending an extra $60-70 on a better one), but I have a USB-C NVME enclosure that I might use with a a spare 1TB that will be removed from the NAS.

Any thoughts?

Edit: sorry forgot to reply. Thank you all for the input, this was great information and I took a deep dive researching some solutions. I ended up just keeping it simple and went with option 2, with the 1TB as the OS drive and 2TB as additional storage, no additional partitions.

Hi everyone,

I’m not sure if this is the right community, but the home networking magazines seem to be pretty dead. I’m a bit green with regard to networking, and am looking for help to see if the plan I’ve come up with will work.

The main image in the post is my current network setup. Basically the ISP modem/router is just a pass through and the 10 Gb port is connected to my Asus router, which has the DHCP server activated. All of my devices, home lab and smart home devices are connected to the Asus router via either Wifi or Ethernet. This works well, but I have many neighbours close by, and with my 30+ wifi devices, I think things aren’t working as well as they could be. I guess you could say one of my main motivations to start messing with this is to clean it up and move all possible devices to Ethernet.

The planned new setup is as follows, but I’m not sure if it’s even possible to function this way.

https://i.postimg.cc/7YftSFt6/IMG-9281.jpg

ISP modem/router > 2.5 Gb unmanaged switch > 2.5 Gb capable devices (NAS, hypervisor, PCs) will connect directly here, along with a 1 Gb managed switch to handle the DHCP > Asus router would connect to the managed switch to provide wifi, and remaining wired devices will all connect to the managed switch as well.

Any assistance would be appreciated! Thanks!

Edit: fixed second image url

Hello!

I’ve been running unRAID for about two years now, and recently had a thought to use some spare parts and separate my server into two based on use. The server was used for personal photos, videos, documents, general storage, projects, AI art, media, multitude of docker containers, etc. But I was thinking, it’s a bit wasteful to run parts that I use once or twice a week or less 24/7, there is just no need for the power use and wear and tear on the components. So I was thinking to separate this into a server for storage of photos, videos and documents powered on when needed, and then a second server for the media which can be accessed 24/7.

Server 1 (photos, videos, documents, AI experiments): 1 x 16TB parity, 2 x 14TB array. I7 6700k, 16GB ram

Server 2 (media, docker): 1 x 10TB parity, 1 x 10TB and 2 x 6TB array. Cheap 2 core skylake CPU from spare parts, 8GB ram.

With some testing, server 2 only pulls about 10w while streaming media locally, which is a huge drop from the 90+ watts at idle that it was running when I had everything combined.

I was hoping to use an old laptop I have laying around for the second server instead, which has an 8 core CPU, 16GB ram, and runs at 5w idle. I have a little NVMe to SATA adapter that works well but the trouble is powering the drives reliably.

Anyways, pros of separating it out, lower power usage, less wear and tear on HDDs so I will have to replace them less frequently.

Cons, running and managing two servers.

Ideally, I’d like to run server 1 on the cheap 2 core skylake CPU (it’s only serving some files after all), server 2 on the laptop with 8 cores (but still have the issue of powering the drives), and then take the i7 6700 for a spare gaming PC for family.

Alternative would be to just combine everything back into one server and manage the shares better, have drives online only when needed, etc. But I had issues with this, and would sometimes log into the web ui to find all drives spun up even though nothing was being accessed.

Anyways, I hope all of that makes sense. Any insight or thoughts would be appreciated!