I keep buying cheap toaster ovens. I keep paying the price for it. At least I know my smoke alarms work
this post was submitted on 06 May 2025
143 points (97.4% liked)
Ask Lemmy
31480 readers
2519 users here now
A Fediverse community for open-ended, thought provoking questions
Rules: (interactive)
1) Be nice and; have fun
Doxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them
2) All posts must end with a '?'
This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?
3) No spam
Please do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.
4) NSFW is okay, within reason
Just remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either !asklemmyafterdark@lemmy.world or !asklemmynsfw@lemmynsfw.com.
NSFW comments should be restricted to posts tagged [NSFW].
5) This is not a support community.
It is not a place for 'how do I?', type questions.
If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email info@lemmy.world. For other questions check our partnered communities list, or use the search function.
6) No US Politics.
Please don't post about current US Politics. If you need to do this, try !politicaldiscussion@lemmy.world or !askusa@discuss.online
Reminder: The terms of service apply here too.
Partnered Communities:
Logo design credit goes to: tubbadu
founded 2 years ago
MODERATORS
Get yourself a nice Panasonic one. $150-ish I have one that's over 10 years old
I have a Samsung printer that simply hates me. Whenever I need to print something urgently it will disappear from the wifi. It shows up for a few milliseconds when restarted and disappears again. However when you have the time and energy to investigate the problem it works flawlessly.
The stove in the place I rent. Only been living here maybe 2 years... and that thing is the devil. I thought it was just me getting used to an electric stove again. Nope, that thing is just a piece of shit.
Nothing can simmer, nothing can be left unattended for more than a few minutes (at most), it can't maintain anything close to a consistent temperature, and forget boiling water before you die of old age... I use an electric kettle just so I can boil noodles in less than 40 minutes
Maybe it's my pots?... nope, I've tried. Maybe I'll get better at using it?... no, and at this point I wouldn't even want to. It's just a piece of shit. My mother-in-law is a great cook, and she was pissed when she burned smothered chicken on it... because she hasn't burned smothered chicken in probably 20+ years; she confirms the stove is garbage
Fuck that stove
Thanks for hearing my rant, I feel a little better now
Edit: I forgot to mention that the fucker is BRAND NEW too. We're literally the first people to use it. Garbage-ass, giant piece of horse shit...
You could get your thermostat checked. Depending on the stove, it's something you could probably do yourself. It's like a ten dollar part, maybe?
We're just planning on moving now, cause we hate this place and there's a multitude of problems: A/C can't keep up with cooling the house, costs a fuck-ton in energy bills, the management company won't fix shit and they're a nightmare to work with. They tried to blame us for rats getting into the attic, when it was a known problem before. Took us 2 months to make them hire pest control, and then acted like we should be grateful for normal-upkeep, and not having rats get inside
The neighborhood is actually nice, but the big-name management company are basically slum lords with a smile. But we had 3 dogs at the time and rental options were few, that had a fenced yard and would accept 3 dogs. 2 of them sadly passed this past year, and as much as I miss them and it wrenched my heart... we realized we could probably find something better now and not need such a large yard (our last dog is old too, and doesn't romp in the yard anymore. He just enjoys little walks now)
The stove is just one of the things I hate about this place and I don't want to fix any of their shite, even for $10. We're just making it work for now
Any device someone ask my help with figuring out. Its rarely the appliance that pisses me off and more the blatant learned helplessness and fundimental inability for fellow adults to rub two braincells together on figuring out a new thing or to troubleshoot a simple problem. A lifetime of being the techie fixer bitch slave constantly delegated the responsibility of figuring out everyones crap for them has left me jaded to the average persons mental capacity and basic logical application abilities.
-
My docking station. The screen sometimes goes black for a second or two randomly. I have had this problem with all kinds of docking stations.
-
My egpu dock. It works great but I have to plug it in after boot or it won't be detected.
-
My samsung galaxy S22 (my last sasmung phone). The camera sometimes doesn't work presumably because a ribbon cable inside is loose.
Have you tried replacing your HDMI cable? That might causing the Docking station issue
I have had the problem with a variety of cables. I think its a software issue. Wiggeling the cable does not cause any issues. The screen never looses signal its just briefly black.
But I guess it can't hurt to try more cables.
This is why I switched to display port. It seems to work so much better. Also see if your dock is overheating. I've had that happen in the past and caused flickering issues.
I tried displayport too. My main dell 4k monitor had some issues with it. I updated the firmware maybe it works better now.
I have two monitors. Depending on where I plug in, it uses MST or no mst.
Also good tip about the overheating but the dock has a fan and remains quite cool during operation.
It's difficult to debug since sometimes it works for two days and on other days it hap'ens constantly.
any fucking thing with touchscreens or touch buttons. those stupid things barely ever work and imagine not being able to use your appliance once that shit breaks.
It registers when my thumb brushes against the screen for a nanosecond but when I want it to register a press I have to tap the screen like a maniac.
Printers
Electric toothbrushes. They really are superior to regular old brushes, but they tend to break down after less than a year and aren't exactly cheap. Ironically, the last time mine broke I replaced it with the cheapest one and it's lasted longer than the ones before it. Go figure!
What do you do for them to break so soon?
I've had two electric toothbrushes in my life. The first one lasted for maybe 10 years. The breaking point was plastic degradation which occluded the internal electronics and destroyed de button to turn it on.
I think could have been repaired with the right materials. The repairability of the brand I buy is pretty good.
For anyone curious the brand is:
Tap for spoiler
Oral b
The electric toothbrushes are nice but the head replacements are too expensive and I've not find a suitable offbrand replacement. So I end up boiling the toothbrush heads several times to extend their lifetime.
So, I have never thought about this before but I would think the lifetime of a toothbrush head is based more on mechanical stress on the bristles and not bacterial growth.
Which I assume you try to address by boiling them. I remember studies made on boiling dishwashing sponges and unless I remember wrong boiling them regularly actually lead to more bacterial growth over time. Don't remember thr explanation and maybe funded by "big sponge".
That said I always use mine at least 2 months longer but am not boiling them.
Philips Sonicare. My first two developed the same problem: some connection inside came loose and the head would be loose and rattly. I tried opening them up and fixing them, but they were too bent out of shape. My third one ( a slightly different model) is going strong for some time now, so maybe I just got unlucky.
They break after a year? I've had mine for a decade now...
Judging from responses in here, I got unlucky.
Not me, but my mother has beef with air conditioners. When I was little, I got sick (to the point of losing consciousness) due to a dirty AC in a hotel, so now she (maybe rightfully) assumes that a random given AC in a public place is filthy. We don't have one at home either - mostly because in this climate we'd only need it for a short time each year, but also because mom thinks it'd be easy to not take care of it properly and let enough filth accumulate.
The ice compartment of our fridge. It's always a fucking compressed block that needs manually smashing up. I fucking hate it so much.
This is such a funny visual I've never heard of this happening
I really cannot believe we fucked printers in so many unique ways.
- No universal drivers and software support, requiring entire settings pages to be about printers
- DRM everywhere, rendering third party cartridges useless
- Routinely bad security, making Wi-Fi enabled printers one of the common attack vectors
Etc. etc.
My favourite bad security thing about them is that it's possible to hack them with a fake fax.
load more comments
(2 replies)
Everything with a built in lithium battery that isn't easy to swap. Phones, headphones, vapes, the weird gameboy thing I got offa aliexpress.
It used to be printers but I switched to a Brother laser printer about five years ago and its been trouble free while having reasonable print costs. You can even force it to print on empty for a bit longer, although you shouldn't push any laser printer too far on empty as you can wreck them.
Toasters are my big gripe. Its been proven that they have massively reduced costs at the expense of longevity and toasting efficiency from what we had decades ago. I have an expensive toaster (from Sage), and I have still had to replace micro switches on the buttons. While it does a better job of even browning than a cheap toaster its still far from the level I expect.
I would buy one of those expensive Japanese toasters or a commercial toaster oven but I do not want that much counter top taken up by it. I would rather just cook my toast in a cast iron pan now, far better finish.
My twin tub washing machine. Fucking POS doesn't spin properly, so i just give up most of the time.
The Oatmeal is correct, the answer is printers
And by extension, scanners
Why scanners?
The big or small ones?
view more: next ›