this post was submitted on 22 Aug 2024
953 points (100.0% liked)

196

16509 readers
2341 users here now

Be sure to follow the rule before you head out.

Rule: You must post before you leave.

^other^ ^rules^

founded 1 year ago
MODERATORS
 
all 48 comments
sorted by: hot top controversial new old
[–] protist@mander.xyz 118 points 2 months ago* (last edited 2 months ago) (1 children)

If water had no polarity, life as we know it could not exist, so the mess in your apt would be the least of your troubles

[–] germanatlas@lemmy.blahaj.zone 72 points 2 months ago (1 children)

we probably would have no troubles at all

[–] thesporkeffect@lemmy.world 95 points 2 months ago (1 children)
[–] Mac@mander.xyz 28 points 2 months ago* (last edited 2 months ago)

i wonder how many actors they went through to film that commercial.

[–] GorGor@startrek.website 92 points 2 months ago (2 children)

If y'all have worked with silicone oil, yea it works kinda like this (depending on viscosity).

It creeps up out of containers, it creeps up walls. It gets everywhere.

[–] shneancy@lemmy.world 32 points 2 months ago

nods like sand

[–] Gormadt@lemmy.blahaj.zone 14 points 2 months ago

I swear that shit must have negative surface tension with how much it gets everywhere

[–] don@lemm.ee 91 points 2 months ago (3 children)

A two micrometer thick layer of water would evaporate nearly instantaneously, I’d think.

[–] TheSlad@sh.itjust.works 72 points 2 months ago* (last edited 2 months ago) (2 children)

Without surface tension, water would evaporate much faster in general. Probably could set out a cup of water in the morning and it would be gone by bedtime.

[–] brbposting@sh.itjust.works 56 points 2 months ago

Nestlé liked this comment

[–] xantoxis@lemmy.world 16 points 2 months ago

Your own body would basically be a fog cloud of evaporation all day until you were dehydrated like a skeleton in a salt flat, which is exactly what you would be, since no life anywhere could exist.

[–] blandfordforever@lemm.ee 14 points 2 months ago

Especially if there were weaker intermolecular forces (which normally give it surface tension).

[–] Honytawk@lemmy.zip 5 points 2 months ago* (last edited 2 months ago) (1 children)

You could even mop it up by placing the mop in the middle of the room and just wait.

[–] hakase@lemm.ee 11 points 2 months ago (1 children)

If there were no surface tension there would almost definitely be no wicking action either. If it didn't evaporate super quickly, water without surface tension would probably be a giant pain in the ass to clean up.

[–] anothercatgirl@lemmy.blahaj.zone 2 points 2 months ago

Surface tension and surface energy are related but different. The surface energy of the interface between water and air causes surface tension. The surface energy of the interface between water and mop fibers causes wicking.

[–] TheMightyCanuck@sh.itjust.works 69 points 2 months ago

Look at this guy bragging about his level floors. Smh

[–] SaltyIceteaMaker@lemmy.ml 53 points 2 months ago (1 children)

Hmm i think that would actually be better as the water where basically non existent caus it's so spread out. It would just instantly evaporate no?

[–] unemployedclaquer@sopuli.xyz 25 points 2 months ago (2 children)

Basic gas mechanics or whatever that's called is now out the window. You are breathing raccoon pee.

[–] And009@reddthat.com 3 points 2 months ago
[–] SaltyIceteaMaker@lemmy.ml 1 points 2 months ago

Well this post was only about water

[–] mvirts@lemmy.world 33 points 2 months ago (1 children)

If water didn't have surface tension, none of us would exist 😹

[–] humorlessrepost@lemmy.world 18 points 2 months ago
[–] uriel238@lemmy.blahaj.zone 31 points 2 months ago (2 children)

Doesn't alcohol (like isopropol) have like zero surface tension? I know it evaporates super fast which is one of the factors that makes it a good cleaning agent.

[–] BallsandBayonets@lemmings.world 23 points 2 months ago (1 children)

That's actually exactly why it's a bad cleaning agent, at least for sterilization purposes. It evaporates before it can kill any microbes.

[–] Daxtron2@startrek.website 21 points 2 months ago (1 children)

Yeah if you're using high percentage isopropanol it's less effective. I think the current recommendation is 70% for sterilization purposes as it remains in contact longer. Higher percentages is more for its use as a solvent or cleaning electronics.

[–] sneekee_snek_17@lemmy.world 6 points 2 months ago (1 children)

I thought the 70% was recommended because it helps maintain membrane fluidity or something like that

[–] LarmyOfLone@lemm.ee 1 points 2 months ago

Yeah or something with hydrophilic properties with the water help destroy microbes. I love reading about chemistry but keep forgetting.

[–] dharmacurious@slrpnk.net 21 points 2 months ago* (last edited 2 months ago) (1 children)

This is almost completely unrelated, but your comment made me think of it for some reason, so story time:

Years ago, I worked at a gas station on the night shift. We had these huge wall mounted containers of cleaning supplies, like soap dispensers in a rest room, but like 30 gallons/100 liters, and full of various cleaning supplies that a company came by every so often and swapped the empties for full ones. There were like 5 of em, for use in cleaning different stuff.

One day, they came and swapped em out, and no one noticed that they'd all been replaced with rubbing alcohol until it was already after end of day for the delivery company. It took weeks before we could get them to come back out, and for several weeks I had to mop the floors and clean the whole store with diluted alcohol. It was sparkling clean, but good GOD the head rush. I had to leave the doors open and blast the AC whenever we were cleaning.

[–] Vytle@lemmy.world 9 points 2 months ago (1 children)

Oh my god I think I would vomit

[–] dharmacurious@slrpnk.net 4 points 2 months ago

It was pretty rough. We got a lot of complaints

[–] cmrn@lemmy.world 30 points 2 months ago

I just spilled my water bottle while in a tent and it feels much more like the latter in this example

[–] volvoxvsmarla@lemm.ee 30 points 2 months ago

Thank god toddler pee has surface tension.

[–] Diabolo96@lemmy.dbzer0.com 27 points 2 months ago

I don't like smart meatwad. He's giving me existential dread.

[–] sheev@lemmy.zip 17 points 2 months ago

This is sending my brain down a rabbit hole I don't want to explore.

[–] olafurp@lemmy.world 14 points 2 months ago

On the flip side if you drop a glass of water it will almost instantly evaporate.

[–] Droggelbecher@lemmy.world 11 points 2 months ago (2 children)

If that was how it worked it would also happen if you spilt oil or liquid soap or soapy water

[–] krashmo@lemmy.world 17 points 2 months ago

It would also evaporate pretty much instantly

[–] AdrianTheFrog@lemmy.world 5 points 2 months ago

There’s also viscosity, adhesion

[–] comrade19@lemmy.world 8 points 2 months ago (2 children)

Petrol is kindve like this but it evaporates so quickly. What weighs less than petrol? Is the rate something evaporates related to the weight?

[–] Dave2@lemmy.blahaj.zone 7 points 2 months ago (1 children)

The rate at which something evaporates is determined by their atoms bond strength, weight has less importance. The reason petrol evaporates fast (and melts and boils at low temperatures) is because they only have London forces, which is the weakest weak bond.

[–] dave@feddit.uk 7 points 2 months ago (1 children)

I had never heard of London forces—named after a German! Thanks Dave2!

[–] Dave2@lemmy.blahaj.zone 7 points 2 months ago (1 children)

So YOU took Dave!! We'll duel for it, at noon, be by the three pronged cactus. (You're welcome tho)

[–] dave@feddit.uk 5 points 2 months ago (1 children)

Your request for a duel is held in a queue and will be answered as soon as I’ve dealt with my colleague who inconsiderately has the same initials as me.

[–] Dave2@lemmy.blahaj.zone 4 points 2 months ago

Good luck then, wouldn't want you get killed by anyone else...

[–] LarmyOfLone@lemm.ee 1 points 2 months ago (1 children)

If you want to test it you could just seal your room, tape the windows and doors and keyholes, then let enough petrol evaporate until the air is saturated. Then you can test spilling it on the floor without fear of evaporation!

[–] comrade19@lemmy.world 2 points 2 months ago

Id love nothing more than to be sealed in a 100% condensed petrol air room haha

[–] fracture@beehaw.org 2 points 2 months ago

water in noita be like: