jmp242

So I was recently in a Clark's outlet and at least the men's shoes seemed obviously a victim of shrinkflation, ie they felt a lot cheaper and lesser quality. Which makes sense as they're still doing 2 for 99 or I guess men's just went up to 109. But they were 50 dollars each at the outlets back in 05, so they simply have to be lesser quality now. And it's really obvious.

So what's a men's shoe that has the quality of older Clark's at maybe 100 a pair now? Anything or do I have to step up to like the Redwing Irish Setter at more like 200?

I mostly want kind of half and half leather boots/shoes. Comfortable. I guess if they also have women's options that would be interesting too for my mom and sister who had liked Clark's back in the day.

So I have a couple month old OnePlus N30 phone, and one thing that drives me crazy with it is when I plug it in at night to charge, eventually it fully charges. You would think this is good, but then it decides to vibrate every 30 seconds or minute or so to tell me it's fully charged. Over and over again till it wakes me up and I unplug it. So far it's still mostly charged by the next morning but this is ridiculous - aren't you supposed to charge the phone overnight?

I tried just turning off the notification but the phone is using the system UI to notify and won't let me turn it off.

Does anyone know how to stop this?

Ideally, there'd be a simple RPM installer compatible with Alma 9 that I can point to a samba share that holds all the photos, kind of like what I do with Jellyfin. Also nice if it uses an otherwise unused port or I can easily set what port it uses.

My googling is finding a bunch of docker stuff, which always seems needlessly complicated to me vs an RPM... I'm also using a low powered x86 tiny computer to front JellyFin and would like to host this on the same computer vs needing another server.

Any ideas?

I just saw that for Spring they're doing a new Spice and Wolf, but it looks like they're not continuing the story but re-making what already had a pretty good IMO anime with 2 seasons. IIRC That anime was also pretty close to the source material, so I can't really see what us watchers will get from a remake other than I guess maybe more modern animation? Which is also kind of a waste cause there's a lot more light novels to adapt IMO.

IDK if this is going to get any responses, but if you have any experience with using propane with a portable generator maybe you can explain what's going on.

So I got a big generator, I previously only used gas, but as this was new and dual fuel, it seemed like propane might be a big win. Propane as far as I know doesn't get old like ethanol gas does, won't gum up small engine carbs like gas does.

However, it had some downsides - the tanks are not able to just have an extra gas can to refill while the generator is running if needed, and for some reason I can't tell the manual gives 0 estimated runtime with propane, but lots for the gas fuel. Ok, well some searching found a Y connector with a kind of switch/indicator that is supposed to auto failover to the second connected tank if the first one empties so you can then change out the tank while the generator is running.

Now my problem. Power goes out last night, it's 20F and I fire up the new generator for the first time. First hour, no issue, however it then starts almost stalling out and then restarting over and over again. I go look at it seems like the "switch" indicated it tried to change tanks but... maybe didn't? It went straight up and down, not pointed to the other side (though IDK if I actually understand the switch, there were like 0 instructions with it from Amazon). OK, I'll just figure out which tank is empty (wondering how it went empty in like an hour on a 20lb tank) and move the switch to the other one and then change out the tank with my spare. Did all this, no change. Cannot get the generator to run right, and cause constant brownouts to my house and the generator makes a sound like it's backfiring every so often. I give up on backup power for the night.

Today, I go look at it again, and it starts up and runs fine today at 43F. However I haven't put a load on it, but it wasn't running right without a load last night, so I don't think it was overloading the generator (and I know it wouldn't given earlier uses when it was warmer). OK, well lets at least use the valves on the top of the 20lb tanks to test the switch over thing. I tried turning off one of the tanks (right), the one the switch / arrow is pointing towards. Nada, generator keeps running, switch doesn't do anything. I turn off left and generator stalls out. Weird. I then reset, restart, and try turning off the left tank - no change keeps running. I then re-open left and close right, no change, generator keeps running. Just to not lose my mind, I also close left and as expected generator stalls out.

Ok, so - do I have a worthless amazon transfer thingy, is the propane just not working at 20F or below? This seems really weird as I have a 500 gallon tank for my entire life for heat and stove and it got down to like -15F a few times with no issue.(I asked my provider, they say they can't hook up the portable generator, or even provide me a propane hose / valve/ anything I could hook it up to.) The 20lb tanks are brand new... So some googling seems to say maybe the tanks need to be warmer? I could get some tank heaters I guess and plug them into the generator also assuming it can run long enough for the heater to do anything and bootstrap stuff when it's cold. However, I'm also concerned about not having any estimate how long it should run from what should be 40lbs of propane. I don't know if the first tank leaked over the months since I set it up (the other 2 didn't), but 1 hour seems really fast to run out, and I would expect at least 8 hours when the gas tank is supposed to be good for 18.

So - do I just give up on propane for this generator? It seems silly to keep propane for the warm months and then switch to gas for the winter...

Canon R5 + EF24-70 2.8 II.

cross-posted from: https://sopuli.xyz/post/4070141

So I've been using Kagi for a while now as a paid search engine. I always thought it's $25 a month plan was a little steep for search, but a) I got work to pay for it, and b) startpage nee google was getting less and less useful, and bing and whatever used it has... well been worse for me always.

Anyway, I just got told that they've now adjusted their pricing / added features to Ultimate, and I think (at least now) that's actually added a lot of value if you're into the more advanced LLVM / AI models / chat. I have also been paying $20 a month through work for ChatGPT Plus. I might drop that because Kagi now lets you chat with / use GPT4 as well as Claude2 and a Google LLVM model with the one $25 a month, in addition to all the search and AI Search (with sourcing) together.

I don't know how well paid search is going to ever do - it might be a short term tool. But for now, not having ads in the search, a straightforward pay for service model that seems to work just as well with their stated privacy goals, and getting multiple AI LLVM is pretty cool "one stop shopping" if you will. I also like giving a shot to alternate models that might be more privacy focused.

So I've been using Kagi for a while now as a paid search engine. I always thought it's $25 a month plan was a little steep for search, but a) I got work to pay for it, and b) startpage nee google was getting less and less useful, and bing and whatever used it has... well been worse for me always.

Anyway, I just got told that they've now adjusted their pricing / added features to Ultimate, and I think (at least now) that's actually added a lot of value if you're into the more advanced LLVM / AI models / chat. I have also been paying $20 a month through work for ChatGPT Plus. I might drop that because Kagi now lets you chat with / use GPT4 as well as Claude2 and a Google LLVM model with the one $25 a month, in addition to all the search and AI Search (with sourcing) together.

I don't know how well paid search is going to ever do - it might be a short term tool. But for now, not having ads in the search, a straightforward pay for service model that seems to work just as well with their stated privacy goals, and getting multiple AI LLVM is pretty cool "one stop shopping" if you will. I also like giving a shot to less ad based models for Internet services that I can't see how they don't become privacy invasions.

Anyone used the Cam Ranger 2?

So, I have a VM DC that I had to restore from a month ago. I had other DCs that were physical and up. My understanding that if sub 60 days "off" it is fine to basically "power back on" the snapshot. However, now the "restored" DC has disabled replication in both directions. Should I manually enable inbound replication first and then after a while enable outbound replication?

Or a better fix method?