Gotta be the KitchenAid mixers no? Especially the older ones. I have a friend that has one from his grandma that's over 50 years old. If anything breaks, it's usually a gear or something simple to fix, and the parts are easy to buy and generally cheap.
Asklemmy
A loosely moderated place to ask open-ended questions
Search asklemmy π
If your post meets the following criteria, it's welcome here!
- Open-ended question
- Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
- Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
- Not ad nauseam inducing: please make sure it is a question that would be new to most members
- An actual topic of discussion
Looking for support?
Looking for a community?
- Lemmyverse: community search
- sub.rehab: maps old subreddits to fediverse options, marks official as such
- !lemmy411@lemmy.ca: a community for finding communities
~Icon~ ~by~ ~@Double_A@discuss.tchncs.de~
Shure SM58/57
SM57s still can get roughed up pretty bad with the plastic covering on the front of the mic (especially if miking a snare drum with a less than precise drummer). SM58 will survive a nuclear war.
Concept2 rowing machines. Even if they break, you can still buy spare parts at reasonable rates even for the very first model, which is decades old and only sold a few copies. Fantastic engineering.
It's a real baader-meinhoff phenomenon: once you notice them, you notice that every gym has them.
Pre GM SAABs. I've personally gotten 2 of my 5 to over 1,000,000 miles on the original engine and transmission. Both manual transmission. A couple hundred of them have made it to 2,000,000 world wide. The lowest milage I killed a SAAB at was 789,000 miles. I hydroplaned into a semi on I-75, and the car still technically ran, but I gave it to my parents as a parts car. Just read the owners manual, and be absolutely religious about basic maintenance.
Oh, and the turbos don't like low octane fuel. It gums them up.
How does a turbo that intakes air get gummed up from low octane fuel? Maybe oil is the issue since turbos have oil seals. Maybe I'm missing some unknown factor on turbos.
It's not the actual turbo that gets gummed, the fuel system is what gums up, but for some reason it's far worse on the turbo versions of the cars. I could put low octane into the non turbo SAABs I had, and it didn't gum up the intake the way the turbo versions did. I don't know why.
The Logitech x3d Xtreme or whatever the hell it's called. it's a $34 flight stick, best one you can get for cheap, and after having and abusing it for years it only had any issues after a rottweiler puppy chewed the cable. Would recommend.
Cast iron skillets.
If you season and clean them the right way they will outlive you.
I'm using the same one that my parents owned for 30 years and hope I will get another 30 years of usage out of it.
We have one my great-grandma got before WWI that we use several times a week.
Akai 4000ds Reel to Reel tape player. So many are still working, built like a tank. They're super cheap on the used market.
Game Boys are usually regarded as durable as hell. There's even one that withstood bombing during the Gulf War (1991)
Me and my cousin went tubing one time and he forgot his gameboy color in his pocket the whole time we were out on the water. There was water behind the screen but it still booted and played with some fresh batteries
Knipex Tools
Honda Engines.
I love some knipex. I've also had great luck with Icon tools. It's harbor freight's knock off versions of snap on, knipex, etc. They're built good, i abuse them and they keep going. And they have a lifetime warranty. Haven't tried the icon ratchets but I hear good things there too
The wrt54g. They don't make wifi routers like they used to.
Careful now, they are too old to be secure. I'd switch to TL-WDR4300.
I bought one specifically for DD-WRT firmware way back when. I now rock a gigabit mesh system but that wrt lasted almost a decade before tech moved on enough for me to switch.
I've been interested in this subject for a while and have a few recommendations.
Stanley Thermos. It could get hit by a fucking train and would still outlive you. Don't recommend putting cofee/milk products etc in them though because it will make the gasket smell. Excellent water container though.
Double edged straight razor. The handle piece is virtually indestructible. I bought a package of like 500 blades for like 30 dollars and haven't had to buy new ones for actual years. Fun fact as well, once you learn to use one it's better for sensitive skin because you're only dragging one razor across your skin per stroke instead of 5 or 7 or whatever the fuck the "better" ones have. Can confirm the "more blades = better" shit is just pure predatory marketing.
Buck knife. Multi tools are cool but if you tend to use the knife often, invest in a higher quality knife and stones to sharpen it. Sharpening stones (not the crap ceramic stuff they try to sell) will last a lifetime and will also keep all your kitchen knives beautiful for years. While you're up to it, get a piece of raw leather, like the back of of an old belt, and use it as a strop to polish off the blade when you're done sharpening, it really does make the cut smoother.
People say Mag light, but I'd personally recommend Olight as well for flashlights. The Olight Baton 4 is a ~600 lumen adjustable brightness flashlight with strobe which will blind you if you aren't careful and its smaller than a pill bottle and comes with a reversible clip and inset magnet in case you need to stick it somewhere to keep the light steady.
A graphite metal "magic" pencil. Instead of using normal graphite, these metal bodied pencils have end pieces you screw in as a tip, are erasable, and one nib takes forever to run out, something like 5 pencils. They dont draw as dark as a regular pencil due to the hardness but for general usage they are handy.
Mighty plugs ear plugs. Want to know what it's like to be deaf? Buy these. They aren't too costly, completely seal the ear, and I only have to get a new package once every few years. They're so effective I had to purchase an alarm clock built for deaf people which shakes my mattress instead of making a sound because I couldn't hear any normal alarm clock after I started using these. This combination is unbeatable if you have awful neighbors or live on a busy street with night traffic.
Any self winding watch. Stop fucking around with button cell batteries and evolve. If it's cheap, that's probably better, if it gets scratched you don't have to care. Seiko is a good brand in my experience.
If you're into camping get a decent mid sized carving hatchet. I have a mid sized Hultafors swedish steel one. People like splitting axes because they do what they're advertised to do, but theyre huge, heavy, and you cant carve or skin with them. A lighter smaller carving axe will do the same job splitting a log if you baton it with a medium sized stick. If you need something bigger to cut down a tree, go for a curved folding saw to bring with the hatchet. The Silky Saw Big Boy is great for that. Also buy a wool blanket. That shit will keep you warm in -35 C if you use it correctly. Also tents are neat but cumbersome, instead invest in a tarp and learn to make a lean to/other tarp configurations in combination with a ground sheet. If you expect you'll be facing inclement or extremely wet weather, get an oilskin tarp (or make one yourself its literally just a cotton sheet which you have ran through a few dryer cycles as hot as possible, and then soaked through in a 50/50 mix of boiled linseed oil and mineral spirits and hung outside until completely dry. Don't put an open flame near it at any point in that process).
I probably have a bunch more, but can't think of them off the top of my head.
Classic Vitamix blender models. They just work. Long warranty. And even post warranty easily serviceable.
And for a buy-it-for-multiple-lifetimes citrus juicer to get juice for the blender, thereβs the Nemco 55850.
Can confirm with the old thinkpads. They're not great for gaming, but the keyboard, track pack, and eraser head are solid for writing and other office-like work.
The old part really does a lot of work here. New ThinkPads are utter trash :-/
I got excited to get one for work (having heard about the old ones) and was sorely disappointed. It thermal throttles if you look at it wrong, it keeps having BIOS issues with Lenovo being no help and the USB-C display connection (To a Lenovo monitor with their inbuilt docking station!) is iffy.
I had one that lasted for 12 years. By the end it was more of a media centre connected to my TV, but still.
The EV 635A. Built. To. Last.
http://recordinghacks.com/reviews/tapeop/electro-voice-635a/
I swear to god - on a dare I used one as a hammer and it lost 0 range on the SA.
Toughest mic and best DR of it's 1965 class. Still a viable non-phantom , mono drum or ambient mic.
True believer!
A discontinued product from AKG called the K-330. The sound, even though nothing to get excited about, was decent, but the durability of these, in my opinion is legendary. When I was a teenager, I was not careful with them at all, and would often forget them in my sweatpants pockets before throwing them into the washing machine, and that happened hundreds of times and it's not an exaggeration. The cable was mostly tangle free, while everyone else had to untangle their earbuds (something that most modern earbud cables can't seem to do as well). These went through abuse more than any other device I've ever owned, and they kept working no matter what. Audio quality wise, they are overpriced in my opinion (I think the MSRP was $100, but because not many bought them, I got them on sale as a teen), but the durability is Nokia level in my opinion.
(Off-Topic) Does anybody have βanti-planned obsolescenceβ communities?
Maybe where good products are discussed or recommended? Similar to r/buyitforlofe but without the shilling of socks
Edit: