Mechanic Advice

275 readers

1 users here now

This community is for getting help with vehicle or other mechanical problems.

Remember, there are no stupid questions, we want everyone to feel welcome. If you don't want to answer a question that you think is silly, then just move on and keep it to yourself.

Rules:

Don't be a dick

That is all.

founded 1 year ago

MODERATORS

ikidd@lemmy.world

BallsInTheShredder@lemmy.world

Brandonb0013@lemmy.world

[FWD Manual] Gear selection problem (lemmy.world)

submitted 8 months ago* (last edited 8 months ago) by UnH1ng3d@lemmy.world to c/mechanicadvice@lemmy.world

14 comments fedilink hide all child comments

Can anyone suggest what might be wrong? I have just changed the clutch and now I am struggling to select gears even when the engine isn't running.

I don't think it's linkage related because it seems to be difficult to select gears just pulling directly on the arms that move the forks too. I don't think I've done anything that should have an effect on the inside of the gearbox, I've removed and refitted the drive shafts and changed the fluid.

Also can anyone confirm my thinking that the clutch and concentric slave cylinder shouldn't be a factor, since the problem exists when the engine isn't running?

Edit: Strangely, after leaving it overnight, gears are selecting perfectly again and I have absolutely no idea why. I didn't change anything 😕

I suppose that should be good news but without knowing what the problem was, I'm not very satisfied. Thank you to everyone for your help.

you are viewing a single comment's thread
view the rest of the comments

[–] UnH1ng3d@lemmy.world 1 points 8 months ago

I will watch the fluid level or maybe even bleed it once more then, but it seems it's going to remain a mystery for now anyway.

I really appreciate you going to the trouble to try and help with this. Thank you very much 😁