this post was submitted on 10 Oct 2023
352 points (100.0% liked)

Technology

37739 readers
438 users here now

A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.

Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.

Subcommunities on Beehaw:


This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago
MODERATORS
 

Archive link

As the sheer quantity of clothing available to the average American has grown over the past few decades, everything feels at least a little bit flimsier than it used to.

The most obvious indication of these changes is printed on a garment’s fiber-content tag. Knits used to be made entirely from natural fibers. These fibers usually came from shearing sheep, goats, alpacas, and other animals. Sometimes, plant-derived fibers such as cotton or linen were blended in. Now, according to Imran Islam, a textile-science professor and knit expert at the Fashion Institute of Technology in New York, the overwhelming majority of yarn used in mass-market knitwear is blended with some type of plastic.

Knits made with synthetic fiber are cheaper to produce. They can be spun up in astronomical quantities to meet the sudden whims of clothing manufacturers—there’s no waiting for whole flocks of sheep to get fluffy enough to hand shear. They also usually can be tossed in your washing machine with everything else. But by virtually every measure, synthetic fabrics are far inferior. They pill quickly, sometimes look fake, shed microplastics, and don’t perform as well as wool when worn. Sweaters are functional garments, not just fashionable ones. Wool keeps its wearer warm without steaming them like a baked potato wrapped in foil. Its fibers are hygroscopic and hydrophobic, which means they draw moisture to their center and leave the surface dry. A wool sweater can absorb a lot of water from the air around it before it feels wet or cold to the touch

A significant amount of polyamide or acrylic is now common in sweaters with four-digit price tags. A $3,200 Gucci “wool cardigan,” for example, is actually half polyamide when you read the fine print. Cheaper materials have crept into the fashion industry’s output gradually, as more and more customers have become inured to them. In the beginning, these changes were motivated primarily by the price pressures of fast fashion, Islam said: As low-end brands have created global networks that pump out extremely cheap, disposable clothing, more premium brands have attempted to keep up with the frenetic pace while still maximizing profits, which means cutting costs and cutting corners. Islam estimates that a pound of sheep’s wool as a raw material might cost from $1.50 to $2. A pound of cashmere might cost anywhere from $10 to $15. A pound of acrylic, meanwhile, can be had for less than $1.

This race to the bottom had been going on for years, but it accelerated considerably in 2005, Sofi Thanhauser, the author of Worn: A People’s History of Clothing, told me. That year was the end of the Multifiber Arrangement, a trade agreement that had for three decades capped imports of textile products and yarn into the United States, Canada, and the European Union from developing countries. Once Western retailers no longer had meaningful restrictions on where they could source their garments from, many of them went shopping for the cheapest inventory possible.

you are viewing a single comment's thread
view the rest of the comments
[–] TwilightVulpine@kbin.social 35 points 1 year ago (1 children)

I'm tired of disposable clothing.

[–] StringTheory@beehaw.org 7 points 1 year ago (1 children)

I did a deep-dive reading and watching videos learning about sturdy and long-lasting fabrics and materials. Learned a bit about tailoring for durability, too. (For example, Duluth Trading shifted the inseams on their Firehose pants forward. The forward seams don’t rub on each other when you walk, and so the inner thighs don’t self-destruct as quickly.)

There are also a ton of excellent resources on how to mend clothing and properly care for it. And it doesn’t take much effort, really.

So now I have a bunch of older clothes, with subtle repairs, still in good shape. Sure, I’d like some sexy new trendy disposable stuff so I can be one of the cool kids - but that’s how fast fashion gets its claws into you. Preying on our magpie-like desires for shiny new things makes somebody big bucks. (And creates huge waste and exploits desperate workers.)

Buy sturdy “classic” clothes. Keep them in good repair. Fight the system.

[–] curiousgoo@beehaw.org 5 points 1 year ago (1 children)

Any particular resources that you trust to share proper information?

[–] StringTheory@beehaw.org 5 points 1 year ago* (last edited 1 year ago)

A good place to start on YouTube is Bernadette Banner’s channel. She is a clothing historian, so there’s a lot of historical and historical recreation stuff, but she also has a few basic repair and tailoring techniques videos. She wrote a mending book that I hear is much more in-depth than her videos (I haven’t read it). https://www.barnesandnoble.com/w/make-sew-and-mend-bernadette-banner/1139915226

Patagonia Wornwear has a lot of repair instructions for outdoor gear (you don’t have to buy their repair materials). https://wornwear.patagonia.com/repairs

Reddit “visiblemending” and “invisiblemending” are also very good resources.