this post was submitted on 16 Nov 2024
169 points (100.0% liked)

Technology

37797 readers
291 users here now

A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.

Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.

Subcommunities on Beehaw:


This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
[–] deegeese@sopuli.xyz 23 points 1 month ago (1 children)

Elmo is too cheap to give his customers real door handles when it can be done in software.

[–] jdeath@lemm.ee 12 points 1 month ago* (last edited 1 month ago) (1 children)

it aint just tesla. i was at a wedding this week and one of my pals rented an electric Ford. no regular door handles, no climate or radio control buttons. we ended up roasting it the whole time. the future is now! he paid $40 to get 200 miles of charge and it only took 90 minutes. all the buttons were screens and the levers were buttons or knobs! seriously stupid

[–] megopie@beehaw.org 10 points 1 month ago (3 children)

The touch pad control shit just sends me “yah, let’s get rid of these cheap, easily manufactured and implemented dials and knobs that can be easily operated without looking and replace them with an expensive touch screen that you need to look away from the road to use, that’s truly the way of the future; Unnecessarily expensive, more difficult to use, and reliant on software that will probably get bricked in 3 years when the executives lay off the team maintaining it so they can give them selves a pay raise.”

[–] jdeath@lemm.ee 9 points 1 month ago (1 children)

also, the disrespect for software that powers the fucking touchscreen is insane (as a non-biased software developer)

[–] megopie@beehaw.org 7 points 1 month ago

It often feels like the software is an afterthought and not given the time and resources it needs to work properly. Like, they slap the screen in to seem tech forward or to stream line dash design, and then dump the problems this creates on to software devs.

[–] dgriffith@aussie.zone 6 points 1 month ago (1 children)

You've got the motive back to front.

yah, let’s get rid of these cheap, easily manufactured and implemented dials and knobs

In modern cars those buttons are an input to a body computer which then sends commands over the vehicle data bus to another module that performs the appropriate function. The touchscreen option is much cheaper once you have more than a few buttons to deal with.

Buttons have different physical shapes, the little decal for the button on each one has to be printed and put on top, each one needs to be connected to power, each one needs to be slotted into the dash somewhere , each one needs to be backlit so you can use it at night, and the signal for each one has to be routed somewhere through increasingly bulky harnesses, etc etc.

A touchscreen sits on the vehicle data bus and with a bit of software, sends whatever command is needed.

Is it a great user experience to press fiddly buttons on a touchscreen while driving down a bumpy road? Fuck no. But it is definitely cheaper and less complicated for the manufacturer.

[–] megopie@beehaw.org 3 points 1 month ago (1 children)

A touch screen is more expensive than an injection molded plastic knob, even if the actual interfacing of the controls is easier.

I take the point that it’s simpler to integrate with how many buttons, dials and controls newer cars have, but I think the proliferation of those bits is part of the same issue. A lot of stuff is being added not because people find use in these things but because companies feel they need to add them to appear like they’re tech forward.

[–] Patch@feddit.uk 2 points 1 month ago (1 children)

A plastic nob is cheaper than a touchscreen, yes. But if you've already got a touchscreen as part of the design anyway (for things like satnav or car maintenance data), it's cheaper to not include any other buttons or inputs and to bundle them all up into one interface.

[–] megopie@beehaw.org 2 points 1 month ago (1 children)

See that’s the thing, you don’t need a touch screen for those things, or even a screen. Everyone has a phone for sat nav, (you shouldn’t be looking at your phone while driving but you also shouldn’t be looking at a screen on the console while driving). And for maintenance stuff a light up an LED is enough.

I think in general there’s just been a proliferation of unnecessary features and with it has gone the affordable new car.

[–] SteevyT@beehaw.org 3 points 1 month ago

The screen is required for the FMVSS standard mandating rear view cameras. The jump in part price from that to touch is less than the amount saved by not having to tool up all the knobs and buttons, paying someone to run wires for all of them, paying someone to assemble all of the fiddly bits, and paying someone to install them in addition to the cost of already installing the screen that would eliminate all the other cost if it were the only input.

[–] jdeath@lemm.ee 3 points 1 month ago

the part that worries me is that planes with touchscreens are coming