It's my favorite deck. I absolutely love the shape and size
jtskywalker
joined 1 year ago
I didn't make the model, I just printed it. But I'm sure there are suitable models out there!
I want to try printing one of these in TPU for the squish. I did a stardew valley chicken today 
Really anything, but skateboarding is my favorite if I had to pick one that brings me the most peace
I got an sv06 a few weeks ago as my first printer and I really like it.
I have had some similar issues when posting or interacting with other instances, especially kbin.social
I have been unable to vote or comment, and I have had other times when I can't see comments from the other instances and they can't see mine.
Something similar may be going on here with lemmy.one but I don't know.
Isn't it a link aggregation site? I feel like that's the point...
There are definitely communities that focus on that, though. I know I personally enjoy the local text posts and comment interactions as it reminds me of the good old days of browsing vBulletin forms all day, but lemmy is kind of a different beast in a lot of ways
Yes, I put a top level comment with details. The e steps were off causing it to under extrude
I've tried tree supports when printing miniatures - I'll start messing with them for other stuff too. Thanks for the tips. I'll try those settings
I watched a few videos on adjusting flow rate and ended up checking my e steps and they were quite a bit off. After fixing that I did a single wall cube to test flow rate and the measurements were right on.
I printed my test piece again and it is way better. I did slice this one in the regular Cura and not the Solvo version since that's what I was using to generate the flow tests but I had all the settings pretty much the same.
Thanks to everyone for the help and suggestions! I will be tweaking my flow and support settings a bit more I'm sure but for now I'm happy with the result
I've been getting some problem layers with this filament, especially on flat pieces like this. The first layer is always good, but flat layers (top and bottom) that are not on the bed are not great, like the filament is sagging and not connecting to the lines next to it, regardless of if they are supported or not. This one was a flat layer (completely horizontal) that was fully supported with the zigzag supports from the sovol version of cura.
I know ideally I wouldn't have totally flat overhangs like this but with the piece I want to print there isn't really a way around that other than printing multiple flat parts and gluing them together.
I am using a Sovol sv06 and overture PLA. I did not have this issue with the sovol silk silver pla.
I've tried leveling my bed again and I think mu z offset is OK because the first layers look good. Currently I'm printing another temp tower and will try some other calibration pieces but any help is appreciated
The printer (sv06) just arrived yesterday and it has already saved the day for my kid.
His RC car stopped turning, and after taking the controllwe apart I found that the piece that actually turns the box inside was broken
I measured everything with my calipers and struggled with it in fusion 360 for like an hour, had to make adjustments and print again, and finally got this:
Put everything together and...
Success!
view more: next ›
These are great! I spaced them so the brackets are mostly under the trucks and they are not very visible. I would definitely recommend PETG or at least extra walls and high infill if using PLA