Kethal

joined 1 year ago
[–] Kethal@lemmy.world 29 points 3 days ago (2 children)

He is currently at 72 million and in the last election got 74 million. This is the third comment in a row that I've had to say this. Where in the world are people getting these ridiculous numbers?

[–] Kethal@lemmy.world 2 points 3 days ago* (last edited 3 days ago)

No it didn't. 74 million votes in 2020, currently at 71 million for 2024. At best he matches previous numbers and that's unlikely. Are people just making shit up?

[–] Kethal@lemmy.world 2 points 3 days ago* (last edited 3 days ago) (1 children)

No he isn't. 71 million votes this year. 74 million in 2020. When the tally is done, at absolute best he matches his old performance within a percent or so, and that's unlikely.

[–] Kethal@lemmy.world 34 points 3 days ago (11 children)

Granted I don't understand those people, but this difference between now and 2020 is lack of support for Harris, not increased support for Trump. I'll add people sitting at home to the list of people I don't want to associate with.

[–] Kethal@lemmy.world 7 points 4 days ago

I could never fully understand the explanation for lift. It turns out it's not the explanation for lift.

[–] Kethal@lemmy.world 4 points 5 days ago* (last edited 4 days ago)

I recently learned that in my car the same light is used to indicate that the parking brake is on and that the brake fluid is low. Nothing bad happened, and it's getting worked on, but my first thought was that the sensor on the brake must be broken. It's poor design, seemingly without reason.

[–] Kethal@lemmy.world 7 points 5 days ago* (last edited 5 days ago) (2 children)

I have heard that the reason for this is that trucks in that size range are less regulated by the EPA. Companies didn't want to put in the research to develop trucks that met emissions standards, so they just make them really heavy for no purpose, evading regulations. Take this with a grain of salt, because I've done zero research of my own on it.

[–] Kethal@lemmy.world 6 points 5 days ago* (last edited 5 days ago)

Maybe something about learning how to use apostophes or whatever.

[–] Kethal@lemmy.world 2 points 5 days ago* (last edited 5 days ago)

Colle

The problem isn't that states have disproportionate power, and moreover the NPVC is a poor solution. The problem is that all but two states allocate their delegates in a winner-take-all manner, so that a candidate with only 51% of the vote gets all of the delegates.

The NPVC requires huge buy in to work because in nearly half of cases it doesn't result it a person's voting power represening their actual vote. Thus, no individual citizen has incentive to support it. If it ever gets enough support to take effect, as soon as a state ends up with its delegates going to a candidate the citizens of that state didn't vote for, they'll repeal it and it will end nationally due to the wording of the law.

The solution is for states to allocate delegates proportionally to the votes of its citizens. That's what voting is all about. If that system were in place, then there would have been no elections with a mismatch between the college and popular vote. Every citizen has individual incentive for that system, more so than the current system or NPVC, and therefore you don't need the group buy-in wording that the NPVC has. It can be achieved on a state-by-state basis, and it would only need a few states to operate this way to have an impact.

Someone is going to point out that there are details and some states want to be fought over for their small percentage to swing the state, but the fact is that this solves the problem, and overwhelmingly this has fewer barriers and weakenesses than NPVC. If you care about this, contact your state government to change how delgates are allocated.

[–] Kethal@lemmy.world 5 points 5 days ago

Not that I'm agreeing in an away about the paranoia about fluoridation, but there is no known safe level of lead. Lead concentration is regulated, but whatever the thresholds are, they aren't based on "safe" levels, just acceptable levels.

https://www.cuimc.columbia.edu/news/lead-poison-and-children-no-amount-lead-safe

 

I've never built a PC before and I don't know that I know all of the considerations.

I'd like something as a server for automated backup from other devices, like phones. I may also do video reencoding on it. I'd like it to be fairly small, but it doesn't need to be that small. This is what I've picked out: https://pcpartpicker.com/list/L3pxGP.

The case, motherboard and power supply I plan to use is the AsRock Deskmini, but it wasn't an option on Part Picker: https://www.newegg.com/asrock-deskmini-x300w/p/N82E16856158068. This was attractive because it says it has a built-in RAID setup. This is for backups, so I'd like RAID, but I don't know anything RAID, so a built-in option sounded convenient. The Deskmeet would have been fine too, but it's out of stock.

Is the cooler OK for that processor? I don't care about a video card, and the 5700G has integrated graphics, but I don't know if I need something else to get the graphics working. Is there anything else I should consider?

Thanks for any help.

1
submitted 1 year ago* (last edited 1 year ago) by Kethal@lemmy.world to c/ahk@programming.dev
 

Using Window Spy, Acrobat Pro doesn't appear to have button IDs to use with ControlClick. I can't find shortcut keys for almost any of the actions, and trying to navigate through the buttons with F6 and tab seems like a no-go too. The only ways I see to do this are to hardcode button positions or use or ImageSearch, both of which I find don't work well because coordinates change with window resizing or different resolution displays.

Does anyone have a different approach or know of a way to handle different displays and window sizes? In particular, I want to activate "Visually digitally sign".

 

The connections under my sink have a flexible tube that I'd like to replace with rigid tube. The stub out from the wall doesn't have the nut and threaded connection I've seen before, and they've used what I think is called a no-hub connector.

Would I use the no-hub connector on the rigid tube or do I sweat something like this on? https://www.brasscraft.com/product/1-12-in-o-d-tube-x-1-12-in-fip-3/ Or is there some other way?

I've soldered the narrower water supply lines, but nothing this large. Is there anything to consider other than heating it longer?

The stub out has corroded on the bottom and there's a thin crack that the no-hub fitting covers, so there isn't a leak now, but I don't know if that will be covered if I sweat on a connector. Is there a way to deal with that crack?

As some extra info, I think that some stubs are threaded into the vertical pipe. This isn't threaded in and doesn't look like it can be removed without opening the wall and replacing it.

 

Is there a way to block all pinterest results from search engines? This doesn't seem to work: https://addons.mozilla.org/en-US/firefox/addon/unpinterested/.

This one doesn't block results in image search: https://addons.mozilla.org/en-US/firefox/addon/hohser/

Simply using "-site:pinterest.com" isn't great, because there are a bunch of pinterest domains: pinterest.com.mx, pinterest.es, etc. Typing them all in every time is a hassle.

view more: next ›