Froghut

joined 1 year ago
[–] Froghut@lemmy.dbzer0.com 4 points 3 weeks ago* (last edited 3 weeks ago)

Being able to save trickplay images in the media folders is my most awaited feature, awesome! Edit: the setting can be found in the library settings, just fyi

[–] Froghut@lemmy.dbzer0.com 1 points 1 year ago (1 children)

I initially tried with those capacitors but decided to also try without them - perhaps you're right and I broke my LDOs by doing that :/

[–] Froghut@lemmy.dbzer0.com 1 points 1 year ago

I tried with the resistor, same thing, 0V. I made two images showing the measurements

[–] Froghut@lemmy.dbzer0.com 1 points 1 year ago (2 children)

Yes, that's what I did and what it shows. I also attached a picture of my test setup just in case I did something wrong there

[–] Froghut@lemmy.dbzer0.com 1 points 1 year ago (4 children)

Yes, I measured across ground and Vin and it shows ~4V. Across ground and Vout 0V.

4
submitted 1 year ago* (last edited 1 year ago) by Froghut@lemmy.dbzer0.com to c/askelectronics@discuss.tchncs.de
 

I'm trying to build a esp8266 weather station and got some MCP1700-3302E to power the esp8266 from a lipo. But when I connect the lipo to the MCP1700 (looking at it flat spot at the front, ground left, Vin in the middle and Vout on the right) I get no output at Vout. I googled and could not find anything. I tested 5 different ones and it's the same for all of them. Could I just have a batch of broken ones? Edit: attached a picture of my very simple test setup Edit 2: I just connected three lipo directly to Vin, that seems to work without any problems (at least for a few days now)