this post was submitted on 23 Aug 2024
9 points (100.0% liked)

Mechanic Advice

275 readers
1 users here now

This community is for getting help with vehicle or other mechanical problems.

Remember, there are no stupid questions, we want everyone to feel welcome. If you don't want to answer a question that you think is silly, then just move on and keep it to yourself.

Rules:

  1. Don't be a dick

That is all.

founded 1 year ago
MODERATORS
ikidd@lemmy.world
BallsInTheShredder@lemmy.world
Brandonb0013@lemmy.world
9
Diagnosing A/C Failure When Idling (lemmy.world)
submitted 2 months ago* (last edited 2 months ago) by venusaur@lemmy.world to c/mechanicadvice@lemmy.world
16 comments fedilink hide all child comments
 

2001 QX4

It has been 90+ degrees where I live and when idling for more than 10-15 min, the A/C stops blowing cold and is humid. Works great otherwise when ambient temps are low and car is moving. The Freon pressure is good. The Enser is old and has some dents, but has been cleaned and looks to be getting airflow. How can I tell what is wrong? Replace the radiator fan clutch? Condenser? Something else? Should also note that the engine temp gets high when on long stretches up uphill highway, but I think that is somewhat normal for an old car, no? Thanks!

you are viewing a single comment's thread
view the rest of the comments
[–] venusaur@lemmy.world 1 points 2 months ago (1 children)

Thanks! Unfortunately the QX4 only has one fan. I’ve seen that some people install an electric fan but I’d rather try to return it to working condition as Nissan intended, unless they didn’t intend to work in 100 degree weather.

[–] jam12705@lemmy.world 2 points 2 months ago (1 children)

If the AC cooling while moving but not when sitting still you have an issue with airflow across the condenser. Check to ensure that the electirc radiator fan is actually coming on when idling and the AC is activated.

[–] venusaur@lemmy.world 1 points 2 months ago (1 children)

I’ll do another test today, but the fan is on lat time I checked. Any way to check how engaged the clutch is? When I spin it after turning off the car is doesn’t spin freely but how can I tell if the clutch is locking up as much as it should?

[–] jam12705@lemmy.world 2 points 2 months ago (1 children)

The clutch is magnetic and you should hear it click when actuvated.

Another thing to look at is your temperature gauge, if your close to overheating the computer will shut the AC compressor off first to save on load.

Outside of checking the air flow and overheating the last thing I would check is the refrigerant charge. Have someone put gauges on and test the pressures.

[–] venusaur@lemmy.world 1 points 2 months ago* (last edited 2 months ago)

Thanks!

Hm idk if I hear the clutch engaging but it definitely is. I can hear a loud motor type of sound when it’s engaged. Just don’t know how much it is engaged tho. Is this something that wears out?

It’s never overheating when it happens. Temp is good.

Charged the freon last year with a pump and gauges. Should be good but maybe there’s a leak. If there’s a leak would it work while driving but not while stopped for some time?