3DPrinting

15600 readers

198 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

andypiper@lemmy.world

henry_rowengartner@lemmy.world

j4k3@lemmy.world

GrayBackgroundMusic@lemm.ee

Issues using PVA with a Prusa XL (lemmy.world)

submitted 3 months ago by mortalic@lemmy.world to c/3dprinting@lemmy.world

6 comments fedilink hide all child comments

Hey all, I'm hoping someone who has dealt with this can help me out. I've got a print that would really benefit from soluble supports. I spent some time reading about using PVA picked up SainSmart PVA 500g as it was recommended on a few different places though I didn't think to check, it doesn't have a filament profile in Prusa Slicer, so maybe that was a mistake. I ended up picking the only other PVA filament profile in hopes it was close which I think was PrimaSelect PVA+ or something.

So I spent more time reading and people suggested print it around 190c. What I ended up doing is using the printing profile "soluble interface", which only puts the soluble material between the support and the print. I didn't change too many other settings (slowed down initial layer, turned off wipe tower).

What I found is that the PVA keeps triggering the filament runout sensor on the hotend, so I kept manually feeding it back in but each time it seemed to just run out again.

Additionally, the PVA would come out in big bubbles instead of thin lines. What am I doing wrong?

you are viewing a single comment's thread
view the rest of the comments

[–] EmilieEvans@lemmy.ml 1 points 3 months ago (1 children)

PVA would come out in big bubbles instead of thin lines.

Dry the PVA before use and keep it dry.

PVA easily crystalizes and if this happens the $30 filament spool is trash. Also, make sure to drop the temperature by more than 5°C for the parked toolhead. Otherwise (you guessed it) it will crystalize and cause a clogged nozzle.

<Rough time estimate is 5-30 min at PLA temperature with no flow but this number depends on the exact PVA filament variant.

[–] mortalic@lemmy.world 1 points 3 months ago* (last edited 3 months ago) (1 children)

I was printing at 190, is that still too hot? It was fresh out of the vaccuseal when I attempted this, but for future attempts I'll be sure to dry it. I'm using SainSmart PVA

[–] EmilieEvans@lemmy.ml 1 points 3 months ago

You should be fine. It is about temperature and time. Don't keep the nozzle heated up when it isn't used. Don't dry it frequently (keep it in a dry environment) and use low temperatures.

190° is the low end of printing temperatures. SainSmart should probably be okay when printed below 210°C

With "special" PVA like FormFutura Helios you go up to 250°C: https://formfutura.com/product/helios-support/

Regardless BVOH should be the better choice at higher cost.