1092
Solar modules deployed in France in 1992 still provide 75.9% of original output power
(www.pv-magazine.com)
this post was submitted on 07 Jun 2024
1092 points (99.7% liked)
Technology
59370 readers
4570 users here now
This is a most excellent place for technology news and articles.
Our Rules
- Follow the lemmy.world rules.
- Only tech related content.
- Be excellent to each another!
- Mod approved content bots can post up to 10 articles per day.
- Threads asking for personal tech support may be deleted.
- Politics threads may be removed.
- No memes allowed as posts, OK to post as comments.
- Only approved bots from the list below, to ask if your bot can be added please contact us.
- Check for duplicates before posting, duplicates may be removed
Approved Bots
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
I thought that solar panels that old performed much worse or stopped working. Especially considering where the tech was in the 1990s.
"performed much worse" is compared to today's manufactured panels. As an example, a 100w panel in 1992 was likely around 12% efficient. This means "of all the light energy hitting the full panel under perfect light and temperature conditions", 12% of that energy is converted to electricity and would produce 100w. Compare this to a middle-of-the-road panel you'd buy for your house today the efficiency is 21%. Both the old and the new panel's efficiency will go down over the years.
What the article is talking about is how much of the original efficiency is retained over the years in real world tests. Lets say we have a 1992 100w panel from my example above at 12% efficiency. That means under the best possible conditions it would generate 100w. Because of age, the article notes that efficiency has degrade to produce 79.5% of its original rating. Meaning this 1992 100w panel today would generate 79.5w. That's still pretty darn good and useful!
Great explanation.
One other point I see I left out was physical size of panel as related to efficiency of converting light to electricity and the reason that 2024's 22% efficiency is so important over 1992's 12%. The 2024 100w panel will be about half the size of the 1992 100w panel. This is important because space to put panels (and cost per panel) are large factors in being able to install solar. So you'd be able to install many more 2024 100w panels in the same space as 1992 100w panels.
There is a solar plant in switzerland that still has functioning panels from the early 80s.
E: Oh, the one I thought of was mentioned in the article already.
They work fine, just not at full capacity. Financing and payback calculations tend to assume they'll be replaced after 30 years, but that's just guesses made by accountants, not reality.
Similar holds for EV or phone batteries. They usually don’t suddenly die, but lose more and more health over time. Realistically, you have to set a threshold, where you call it no longer useful.
If the life expectancy was 80%, then we’ve passed it and they are due for replacement. If it was 70% the they still have years of useful life.
It’s probably one of those two. For phones, I replace batteries when health drops to 80%, because I spend too much of my life online. Also, I’m probably giving my phone to my kid about then, so they deserve a fresh battery. I have kept phone batteries down to about 70% life, but then it usually doesn’t last the day and I’m carrying portable chargers everywhere
I haven’t had an EV long enough but I believe the typical battery warranty is defined like that: not just that it’ll work for 10 years, but that it will still be at least 70% health after ten years