Home Automation

2951 readers

1 users here now

Discussion about general home automation ideas and projects, home automation protocols like Z-wave, Zigbee, Matter, etc, and home automation software and hubs like HomeSeer, Home Assistant, OpenHAB, Homey.

founded 1 year ago

MODERATORS

Moskus@lemmy.world

Feeling Overwhelmed Picking Door Sensors (lemmy.world)

submitted 5 months ago by njordomir@lemmy.world to c/homeautomation@lemmy.world

9 comments fedilink hide all child comments

I'm looking for door & window contact sensors and motion sensors to replace an old Simon 3 ADT security system. I've read a lot of posts and such and I'm still having a hard time picking out sensors that will work with an existing Smarthings v2 Hub (currently used for lights) and eventually Home Assistant once life calms down a bit more and I have time to go through all the setup. As I understand it, matter/thread support was added in the v3 hub so I don't have this on my ST v2.

I'd like to avoid anything from Amazon and locally functioning sensors are preferred.

Can anyone advise on how to pick good devices? There seems to be tons of info out there, but I'm having trouble sifting through it for the info I need. This is a surprise for a family member who has been considering replacing an older system. I'd like to get it in place before they have the chance to buy a crappy, locked down, spyware riddled system from a company like Amazon so that I can be sure everything will transition smoothly to Home Assistant later.

you are viewing a single comment's thread
view the rest of the comments

[–] NeoNachtwaechter@lemmy.world 1 points 5 months ago

I have tried door/window sensors from Aliexpress that run on batteries and send a 433MHz signal. If you look hard enough: the type that sends 'open' AND 'close' signals.

Then a 'Sonoff' bridge device with Tasmota firmware to translate from 433 to WiFi/MQTT for HA.

This works very good. The range of a 433 signal is enormous. (It was >5 years ago, so I don't know if that bridge device is still available now)

Their advantage is that this technology needs only low power, so the sensors can last long on a battery.

The disadvantage is that replacing batteries in the sensors after 1 - 1.5 years still sucks.