homeassistant

12107 readers

56 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago

MODERATORS

GreatAlbatross@feddit.uk

what's a good ip camera for home assistant? (lemmy.world)

submitted 5 months ago by swooosh@lemmy.world to c/homeassistant@lemmy.world

42 comments fedilink hide all child comments

I don't have yet any preferences. Cheap, easy to set up, secure. What do you use and can recommend?

you are viewing a single comment's thread
view the rest of the comments

[–] glimse@lemmy.world 1 points 5 months ago (1 children)

I thought the doorbell camera worked great with frigate, is that not the case? I don't have a need for cameras yet but that was on my shopping list...all cameras will be on a locked down vlan so it's fine if it TRIES to phone home if it still works "offline"

[–] ironhydroxide@sh.itjust.works 2 points 5 months ago (1 children)

The doorbell does, except for no sub stream. And the only way for mine to be setup is their bs app.

I should've looked better when buying, but alas. I have this one and I'm lazy.

[–] glimse@lemmy.world 1 points 5 months ago (1 children)

Are you running them with Frigate? I was thinking the lack of substream wouldn't be a problem because the frigate server could downscale if needed (but I haven't really looked into it yet)

[–] ironhydroxide@sh.itjust.works 2 points 5 months ago (1 children)

Yes, the issue I have with no sub stream (only on the doorbell) is that it uses more processing for detection on such a large resolution.

[–] glimse@lemmy.world 1 points 5 months ago (1 children)

Ahh gotcha, didn't consider that! I'll have to make sure my processor is up for the task. I think it will be...I'm doing 4 cameras + doorbell max and buying a NUC

[–] ironhydroxide@sh.itjust.works 2 points 5 months ago (1 children)

Just make sure they have substreams and get a coral (or GPU) for detection. Then a pi could probably handle it.

I have enough processing to do it all on CPU (8 cams+doorbell) but it ramps up the power usage, so it was better to use the gpu I already had for transcoding, as detection.

Without you can still just record and overwrite. Not that it's extremely useful without detection and notifications.

[–] glimse@lemmy.world 1 points 5 months ago (1 children)

I was planning on an Intel CPU that was recommended when I was putting my list together which I was told could handle detection up on to 8 cameras without issue (so I could skip the Coral all together)

[–] ironhydroxide@sh.itjust.works 2 points 5 months ago (1 children)

Handle is much different than efficiently calculate.

[–] glimse@lemmy.world 2 points 5 months ago

Sure, I just figured if it worked well with 8 it would work well with 4 + 1 unoptimized stream. If it doesn't work, I can just spend $40 on a coral