this post was submitted on 10 May 2024
50 points (100.0% liked)
Technology
37727 readers
603 users here now
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Neuromorphic hardware is going to jump many orders of magnitude over classic hardware. When we get a RAM that can execute multiple layers in parallel at once, per clock tick, we'll see whole AI ecosystems cooperating to get a solution in a fraction of the time a single modern NN would take.
Yes orders of magnitude, but not too many of them. The real estate of a 300 mm wafer is limited, the structure shrink is saturating and you can't get too many layers. You still need a packet switched network on the wafer even if the rest is mostly analog. Perhaps spintronics can limit the power requirements too.
The orders of magnitude will come from the RAM running a whole layer at once in "a single clock", without the need for a processor to execute any of it. It's conceivable that multiple layers could be written/"programmed" into neuromorphic RAM, then a processor could just write the inputs, send an execute, move data from outputs to the next inputs, and repeat for all layers.
For example, an nVidia A100 goes up to 1,200 INT8 TOPS with 80GB of RAM at 1500MHz... but if the RAM could execute a neural network directly, that could raise it up to 80G*1.5G=120,000,000 INT8 TOPS, or 5 orders of magnitude.
A free running cellular automaton (CA) approach in hardware would work, but each cell would be a much souped up SRAM cell, the interactions would be all local and 2D. Considering Cerebras is 40 G SRAM on the 300 mm WSI and is about at the cooling limit I'm afraid you do not have 5 orders of magnitude. Perhaps reversible spintronics can help with the power draw, but you still have to splat a higher dimensional network so not just local interactions into a 2D array.
Current research points to memristors, which can work both as memory cells, and as weights in a n×m grid representing a fully connected n->m layer that executes in 1 clock. I forgot which company was showing prototypes since pre-covid... and now Google is so full of wannabes that I can't seem to find it, oh well.
Cerebras is at the limit of SRAM, that's true.
Spintronics could be the next step, but seems to be way less ready for production.
Higher dimensionality would be nice, but even at 2D, being able to push multiple processes at once, through multiple n×m layers, would already give those 5 orders of magnitude, at least for inference. Since training also involves an inference step, it would speed that too, just not as much.
Self-training would be the next step after that... I don't think I've seen research in that regard, but maybe I've just missed it.