this post was submitted on 22 Mar 2024
37 points (100.0% liked)

Astrophotography

1766 readers
15 users here now

Welcome to !astrophotography!

We are Lemmy's dedicated astrophotography community!

If you want to see or post pictures of space taken by amateurs using amateur level equipment, this is the place for you!

If you want to learn more about taking astro photos, check out our wiki or our discord!

Please read the rules before you post! It is your responsibility to be aware of current rules. Failure to be aware of current rules may result in your post being removed without warning at moderator discretion.

Rules




If your post is removed, try reposting with a different title. Don't hesitate to message the mods if you still have questions!


founded 1 year ago
MODERATORS
 
you are viewing a single comment's thread
view the rest of the comments
[–] lefty7283@lemmy.world 3 points 7 months ago (1 children)

The Little Dumbbell Nebula gets its name because it kinda looks like a tinier version of the Dumbbell Nebla M27 (yes, a different palette was used for this pic). It's really tiny compared to the uncropped FOV. I'm a lot happier with this attempt at it, compared to my 2019 pic of M76 with the same equipment. I know It's a bit out of season rn but I needed something to shoot at the start of the night. The nebulosity itself is false color, but the stars are true color RGB. Captured over 10 nights in Feb/Mar 2024 from a bortle 9 zone (I could only get a couple hours max per night on it.

Places where I host my other images:

Flickr | Instagram


Equipment:

  • TPO 6" F/4 Imaging Newtonian

  • Orion Sirius EQ-G

  • ZWO ASI1600MM-Pro

  • Skywatcher Quattro Coma Corrector

  • ZWO EFW 8x1.25"/31mm

  • Astronomik LRGB+CLS Filters- 31mm

  • Astrodon 31mm Ha 5nm, Oiii 3nm, Sii 5nm

  • Agena 50mm Deluxe Straight-Through Guide Scope

  • ZWO ASI-290mc for guiding

  • Moonlite Autofocuser

Acquisition: 21 hours 6 minutes (Camera at -15°C), NB exposures at unity gain and BB at half unity

  • Ha - 99x360"

  • Oiii - 83x360"

  • R - 101x60"

  • G - 100x60"

  • B - 99x60"

  • Darks- 30

  • Flats- 30 per filter

Capture Software:

  • Captured using N.I.N.A. and PHD2 for guiding and dithering.

PixInsight Preprocessing:

  • BatchPreProcessing

  • StarAlignment

  • Blink

  • ImageIntegration per channel

  • DrizzleIntegration (2x, Var β=1.5)

  • Dynamic Crop

  • DynamicBackgroundExtraction

duplicated each image and removed stars via StarXterminator. Ran DBE with a shitload of points to generate background model. model subtracted from original pic using the following PixelMath (math courtesy of /u/jimmythechicken1)

$T * med(model) / model

Narrowband Linear:

  • Blur and NoiseXTerminator

  • StarXterminator to completely remove stars (to be later replaced by the RGB ones)

  • ArcsinhStretch to slightly stretch nonlinear

  • iHDR 2.0 script to stretch each channel the rest of the way.

This is a great new pixinsight script from Sketch on the discord. here's the link to the repo if you want to add it to your own PI install.

RGB Linear:

  • ChannelCombination to combine monochrome R G and B frame into color image

  • SpectroPhotometricColorCalibration

  • BlurXTerminator for star sharpening

  • HSV Repair

  • StarXterminator to generate a stars-only image

  • ArcsinhStretch + HT to stretch nonlinear (to be combined with starless narrowband image later)

Nonlinear:

  • PixelMath to combine stretched Ha and Oiii images into color image (/u/dreamsplease's palette)

R = iif(Ha > .15, Ha, (Ha*.8)+(Oiii*.2))

G = iif(Ha > 0.5, 1-(1-Oiii)*(1-(Ha-0.5)), Oiii *(Ha+0.5))

B = iif(Oiii > .1, Oiii, (Ha*.3)+(Oiii*.2))

  • NoiseX again

  • Shitloads of Curve Transformations to adjust lightness, hues, contrast, saturation, etc

  • LocalHistogramEqualization

  • UnsharpMask

  • More curves

  • ColorSaturation to slightly desaturate the purples

  • even more curves

  • Pixelmath to add in the stretched RGB stars only image from earlier

This basically re-linearizes the two images, adds them together, and then stretches them back to before

(again, credit to Jimmy independent starless processing stuff)

mtf(.005,

mtf(.995,Stars)+

mtf(.995,Starless))

  • Couple final curves

  • DynamicCrop waaaay in on the nebula

  • Annotation

[–] Gnomie@lemmy.world 2 points 7 months ago* (last edited 7 months ago) (1 children)

As a beginner, seeing this information really helps. Thanks for including it all and you’ve made a fantastic picture.

I have a couple questions if you don’t mind: what does NB and BB mean and regarding the number of calibration frames, do those numbers represent your choice at imaging time or what remained after excluding any that you or the software didn’t like? Thanks!

[–] lefty7283@lemmy.world 2 points 7 months ago (1 children)

NB = narrowband (the Ha and Oiii filters) and BB = broadband (the RGB filters). Because I’ve got a lot of light pollution I use a lower gain for the broadband filters since they let a lot more light through.

I only count exposures post-rejection. The morning after imaging I’ll look through the pics and delete them if it was cloudy, out of focus, not centered, or if the stars trailed. The rest go on to get calibrated and stacked for the final image.

[–] Gnomie@lemmy.world 2 points 7 months ago