this post was submitted on 13 Aug 2023
60 points (95.5% liked)

ErgoMechKeyboards

5827 readers
29 users here now

Ergonomic, split and other weird keyboards

Rules

Keep it ergo

Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)

i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²

¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid

No Spam

No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.

No Buy/Sell/Trade

This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.

Some useful links

founded 1 year ago
MODERATORS
 

Yeah, it's a lot, isn't it?

This is the most feature-rich build I've done yet at Wylderbuilds.

It's a... (big breath in)... Full 6x7 Dactyl Manuform printed in translucent blue PLA with full hot-swap support, dual trackballs, dual OLED screens, dual rotary encoders, underglow RGB, running QMK... wheeze... with Vial support... gasp... on Pi Pico controllers!

It's not for jotting down grocery lists.

Well, unless it's the grocery list of the gods.

In other news, our back-to-school sale is still on. Get 10% off all orders of $50 or more with code ERGONOMICS-101. Sale ends on August 31st, so act... Well, that's like over two weeks away, so you've got time.

But feel free to browse!

Full Builds

PLA Case Prints

Resin Case Prints

DIY Build Kit

Cheers!

Andy @ Wylderbuilds

PS. The switches shown are my test switches used during builds. They're not included in the build as it's fully hot swap capable, so customers can use any switches they like. The switches on the left are Kailh Speed Copper and on the right they're Kailh Purple Pros. I didn't have enough of either for the whole, vast keyboard.

you are viewing a single comment's thread
view the rest of the comments
[–] btobolaski@threads.ruin.io 2 points 1 year ago (1 children)

I'm curious if you'd be willing to share the generator and qmk config. I've been wanting to rebuild my Dactyl with screens and a rotary controller + trackball on the right. I'm pretty set on building it myself as I've basically customized all of the parameters to better fit my hands and I'd likely need to print a bunch of cases to tune them for the modifications. That being said, I'd much rather just pay you to build it.

[–] wylderbuilds@lemmy.world 5 points 1 year ago

Of course!

I maintain a python-based generator here:

https://github.com/bullwinkle3000/dactyl-keyboard

It can be a PITA to get working to generate STL and STEP files with the cadquery engine. If you have issues, just reach out to me.

And I also have a fork of Vial-QMK here:

https://github.com/bullwinkle3000/vial-qmk

The specific setup for this build is this subdirectory:

https://github.com/bullwinkle3000/vial-qmk/tree/wylderbuilds/keyboards/handwired/wylderbuilds/trackball/6x7_full_dual_track