3DPrinting

15607 readers

186 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

andypiper@lemmy.world

henry_rowengartner@lemmy.world

j4k3@lemmy.world

GrayBackgroundMusic@lemm.ee

162

Word of warning to those with Prusa MK4 and Satin beds. There is a chance that the auto bed leveler will mess up and destroy your print surface. (lemmy.world)

submitted 8 months ago* (last edited 8 months ago) by the16bitgamer@lemmy.world to c/3dprinting@lemmy.world

55 comments fedilink hide all child comments

I've tried to report the issue to Prusa support but they keeps trying to diagnose it as user error. But at this point I'm at a loss and presume that it's either a firmware issue or a sensor issue on my unit.

Either way im very disappointed.

And before you ask, this is the opposite side

PXL_20240301_160413072

EDIT: I will note that this print sheet is ruined for my use case, since those patterns will be shown on the underside of my prints. But the print surface still works and can be used without issue... if you ignore the gouges that are being detailed into every print.

you are viewing a single comment's thread
view the rest of the comments

[–] Zess@lemmy.world 12 points 8 months ago (5 children)

I'd just shove some wood filler in the gaps to at least have a smooth floor even if it doesn't look great. I feel like I'd stub my toes on that shit all the time.

[–] Imgonnatrythis@sh.itjust.works 18 points 8 months ago

I use some wood filament pla and custom print filler blocks 😉

[–] Chip_Rat@lemmy.world 14 points 8 months ago (1 children)

What op should do is tap/slide the boards all to one end so the gaps all come together as one big gap at the less important side of the room. Maybe there's a bookcase or tv against that wall so they don't step there.

[–] navi@lemmy.tespia.org 4 points 8 months ago

And nail on small nail in the end board to keep it in place

[–] mosiacmango@lemm.ee 10 points 8 months ago* (last edited 8 months ago)

With gaps like that, it will be easier to use wood to fill them.

[–] Magrath@lemmy.ca 5 points 8 months ago

Those look like pretty big gaps, close to 1" on the biggest. That's gonna take a whole of woodfiller.

[–] Grass@sh.itjust.works 4 points 8 months ago* (last edited 8 months ago)

No don't. My parents house came like that when they bought it when I was like 14. The panels continue to slide and crush the filler into dust and the ends also get mashed and delayered. Sometimes big chunks came out to be stepped on like Legos already have the job of doing.