this post was submitted on 23 Feb 2024
14 points (93.8% liked)
Linux Gaming
15274 readers
131 users here now
Discussions and news about gaming on the GNU/Linux family of operating systems (including the Steam Deck). Potentially a $HOME
away from home for disgruntled /r/linux_gaming denizens of the redditarian demesne.
This page can be subscribed to via RSS.
Original /r/linux_gaming pengwing by uoou.
Resources
WWW:
Discord:
IRC:
Matrix:
Telegram:
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Give
firmware-git
a shot. There are some fixes in it that are not infirmware
yet.If that doesn't solve it: for "underclocking" you would have to set a kernel param to enable it. I had a good experience with
lact
. They also explain the necessary setup in their README. In my case the GPU was running with higher limits than the vendor specified. I simply clocked it back to these specs and it seemed to have worked fine so far. It's a different GPU, though.If that also doesn't solve it: do you have Windows as dual boot option? Can you try the same games there? If that is also unstable, I would suspect hardware issues.
I think I finally have it all figured out. I was previously using corectrl to monitor and adjust the GPU but lact has so much more info and adjustment. I immediately saw the card flapping between clock speeds under load. I applied the only high clock speeds setting and that all stopped the voltage stayed constant. However and this is why I didn't realize with corectrl is that the card was now thermal throttling causing an undervolt condition. I went in cleaned out the dust bunny's, dislodged a sata cable from one of the fans and relocated some hard drives for more airflow. The card now runs at a toasty 85 under load which from my past amd experience is perfectly fine. Thank you for the help kind stranger.
Good to hear to got it solved. Enjoy your GPU again 🙂