I use trig every few years when buying a tv. Tv specs always list diagonal but rarely horizontal and vertical which is needed for knowing how a TV will fit in a space.

[–] lolcatnip@reddthat.com 13 points 10 months ago (2 children)

I'm trying to figure out how you need trig for that. Just the Pythagorean theorem and ratios seem sufficient to me.

[–] chumbalumber@lemmy.blahaj.zone 2 points 10 months ago (1 children)

Ratios can be used in trig -- if it's 1.5 times as long as it is tall, tan(\theta) = \frac{2}{3}, which then allows you to find the lengths of the other two sides easily so long as you have a calculator.

[–] lolcatnip@reddthat.com 2 points 10 months ago (1 children)

Right, but why bring theta into it at all? TV screens are as a hypotenuse (a²+b²) with a fixed ratio (a/b=16/9), so you just need to solve for a and b.

[–] chumbalumber@lemmy.blahaj.zone 1 points 10 months ago* (last edited 10 months ago) (1 children)

You don't have to, but it seems perfectly easy since you don't have to write anything down to solve it. c*sin(arctan(b/a)) gives b, and c*cos(arctan(b/a)) gives a. I'm not disputing that you can do it without, but I don't think it's necessarily any quicker or easier.

[–] lolcatnip@reddthat.com 2 points 10 months ago

If it works it works. I just never would have thought to do it that way.

[–] Appoxo@lemmy.dbzer0.com 1 points 10 months ago

I am trying to figure out why you'd even need that.
The measurements of the product is usually written in the tech spec.

[–] ComicalMayhem@lemmy.world 4 points 10 months ago (1 children)

I mean unless you're able to do it in your head in less than a minute, bringing a tape measure would probably be faster and easier.

[–] Annoyed_Crabby@monyet.cc 4 points 10 months ago

Or just check the spec on the box/website.