homeassistant

12055 readers

34 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago

MODERATORS

GreatAlbatross@feddit.uk

Shower Extractor Fan (lemdro.id)

submitted 1 year ago by mrmercedes@lemdro.id to c/homeassistant@lemmy.world

11 comments fedilink hide all child comments

I was looking to automate a shower Extractor Fan as I don't find the ones with the inbuilt humidity sensor very good.

So: Aqara Humidity sensor placed somewhere in the shower. Near the fan. Occupance sensor. Sonoff switch to trigger the fan.

If the humidity is > than threshold and the occupance sensor is active = turn on fan.

I was looking for a good ZigBee occupancy sensor though , the aqara fp sensor look all wired and not battery operated.

Maybe this one : https://m.aliexpress.com/item/1005004692544265.html?spm=a2g0n.detail.1000014.1.7b5e54e06iUEhv&gps-id=platformRecommendH5&scm=1007.14452.335518.0&scm_id=1007.14452.335518.0&scm-url=1007.14452.335518.0&pvid=a535df07-7d30-43fb-98f1-494d4d841170&_t=gps-id:platformRecommendH5,scm-url:1007.14452.335518.0,pvid:a535df07-7d30-43fb-98f1-494d4d841170,tpp_buckets:668%232846%238108%231977&pdp_npi=4%40dis%21EUR%2159.06%2147.25%21%21%2163.21%21%21%402101c6e316911769720411084efc92%2112000030122162722%21rec%21IE%21%21A&search_p4p_id=202308041222520688160562971647313150_0

you are viewing a single comment's thread
view the rest of the comments

[–] halfsak@lemmy.world 10 points 1 year ago* (last edited 1 year ago) (1 children)

No need for occupancy sensor. I have mine set to turn on when bathroom humidity is both above 70%, and 10% greater than my living room humidity. It'll run a minimum 5 minutes, and then once the humidity is back within 10% of the living room, or below 68%, it'll shut off. It's been working great for over a year.

I also have it set to auto shut off 20 min after manually being turned on, but just before shutting down it checks the humidity to make sure it doesn't meet the above criteria. This avoids the event where you turned the fan on while dropping a deuce but then got in the shower right after - don't want the fan shutting down early. Also, if I ever manually turn the fan back on within 5 minutes of it auto shutting off, it will run for 10 min before shutting down vs the normal 20.

[–] Sh0ckw4ve@lemmy.world 1 points 1 year ago (1 children)

Which fan and sensor are you using? Anything you would recommend?

[–] halfsak@lemmy.world 2 points 1 year ago

I'm using aqara temp/humidity sensors throughout the house. I'm not sure what the fan is, it's just a standard exhaust fan, but its controlled with a Kasa smart switch.