ErgoMechKeyboards

5849 readers

97 users here now

Ergonomic, split and other weird keyboards

Rules

Keep it ergo

Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)

i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²

¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid

No Spam

No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.

No Buy/Sell/Trade

This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.

Some useful links

EMK wiki
Split keyboard compare tool
Compare keycap profiles Looking for another set of keycaps - check this site to compare the different keycap profiles https://www.keycaps.info/
Keymap database A database with all kinds of keymap layouts - some of them fits ergo keyboards - get inspired https://keymapdb.com/

founded 1 year ago

MODERATORS

Tips for designing a quiet case for a board? (lemmy.world)

submitted 1 year ago by DanL4@lemmy.world to c/ergomechkeyboards@lemmy.world

9 comments fedilink hide all child comments

So, I've made the mistake of entering a keyboard store in Berlin. Nothing ergonomic there, so all they deal with are great looking boards, heavy, well built, and quiet!

I've built and designed my share of boards, and the sound hadn't bothered me at all until recently. I've designed my first 3d printed case, it's a one piece, just needs a bottom cover.

It acts like an amplifier to my typing. It's not a pleasant sound at all.

What would be the best way to design a quieter one piece board? What materials could make a difference? I was thinking of a metal switch plate, can It be used together with 3d printed layers? Wood? Should I use foam?

Looking for a choc build (more difficult due to lack of silent choc switches) as well as an mx build (probably bobba u4 switches, which will take care of most of the noise)

Thanks!

you are viewing a single comment's thread
view the rest of the comments

[–] cerement@slrpnk.net 5 points 1 year ago* (last edited 1 year ago) (1 children)

similar to a drum, the empty space inside the case acts as a resonator and most of the dampening options try to fill in the space – EDIT: reminder that whatever you use, make sure it’s non-conductive

initial sound generation – silent switches, no long-pole stems – reminder that switches generate as much sound on upstroke as downstroke
dampening the plate response – burger mount, gasket mount
empty space between plate and PCB – most commonly filled in with laser cut Poron foam (“plate foam”)
empty space in case under PCB – filled in with a whole range of materials
- most common currently also laser cut Poron foam (“case foam”)
- early experiments with rubber shelf liner, Sorbothane (automotive audio dampener), and Poly-fil all with good affordable results
- high-end DIY includes silicone pours – filling up the bottom of the case with silicone and letting it set in place (how-tos on Youtube)

[–] DanL4@lemmy.world 1 points 1 year ago

Thanks! That's one serious checklist :-)

The case I made might be a lost cause - it's got very little space for dampening the sound with foam, but enough to become an echo chamber. I'll see what I can do, but not optimistic.

I will keep this in mind for my next design though.

Thanks again!