this post was submitted on 17 Oct 2023
12 points (100.0% liked)
3D Printing
4358 readers
1 users here now
For everyhting 3D printing related.
Please be excellent to each other :)
Icon by Freepik, Banner photo by Thiago Medeiros Araujo
founded 4 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Can you elaborate on this please?
If the printer is fully enclosed (door and lid closed) and the print is long enough. The heat from the hotend and bed can build up in the chamber, causing heat creep. The chamber temperature is not monitored. Since the nozzle and heatbreak are one piece, removing the clog is a bit more involved.
I've had to do it 3 times since I bought the printer on release. All were 12+ hour PLA prints and done after high temperature filament prints (nylon and abs).
The issue is entirely preventable, just me forgetting to open the door on long prints lol.
I mostly print PLA so the lid is propped open and the door is ajar... Once winter comes to the midwest and my basement is freezing cold I may have to adjust things a bit. I added a Prusa MINI in January 2022 and could not print properly until I added an enclosure.
PLA doesn't like heated enclosures, basically the filament melts at such a low temperature that the heat inside the printer can soften it enough to jam up.