3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
Before you head down the FDM or SLA path, consider what you will be printing.
FDM prints will be stronger and don't require any post-proceasing. They will require mechanical post processing (filling, sanding) if you want smooth features, but depending on what you intend to use the part for this might not be necessary. Some filaments, like ABS and ASA require some caution while printing (they release VOCs) and some filaments can absorb water while they're out in the open, causing a decrease in print quality. If you stick to PLA and/or go through spools reasonably quickly it won't be an issue. I print mainly PETG and while I don't dry my spools and store them out in the open I don't really have any issues with older spools.
SLA prints can have much smaller features, but require post processing (rinse and cure). SLA printers also tend to have smaller build volumes. There's also the whole having to deal with unused resin thing and the fact that you probably should collect waste products and dispose of them properly. But if you're making minis or something like that you're much better off with a SLA printer.
On the FDM printer, a cheap stocker printer with a big following (eg Ender) is usually a fine option. There will be a lot of support in terms of community and parts. I've been running a rebranded Wanhao I3 clone, which is essentially an earlier ender, for 5+ years without much modifications. That said, if you find yourself going down the upgrade rabbit hole you might be better off buying up a tier. Prusas are well thought out and generally pretty reliable. Personally, I'm in the process of building a Voron 2.4. It's going to be overkill, but it's also a great platform. I am not sure that I would recommend one for your first printer unless you're fairly mechanically inclined.