Fourth try on a print. Tried to add some adhesive to the bed to get it to stick better. Watched the first two layers and went to bed. Woke up to a printer on strike.
this post was submitted on 06 Jan 2025
277 points (97.9% liked)
3DPrinting
15902 readers
77 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
They have all the parts available on their site.
Until they decide not to sell these anymore
So pretty much like every other company in existence? I don't think there is any danger of BambuLabs disappearing anytime soon and their parts are dirt cheap.
Open hardware projects have the parts blueprints published
But you're still relying on companies to produce these parts for you and they'll only do it so long as the market is big enough to make it worth it for them.
Open source is definitely preferable, but at this point and time, their proprietary parts aren't an issue at all as they're cheap and readily available and with the popularity of these printers, I don't see it being an issue for quite a long time. By then, I may have moved onto a new printer anyway since the market is constantly progressing.
Time will teach you the lesson
The lesson that all consumer electronics have a limited shelf life? That's pretty well known.
There are already several aftermarket suppliers making parts for them, including a drop-in e3d hot end. Look, I generally prefer open source designs, but the hassle-free workflow with an X1C has been worth it.
Also, they sold a PILE of these things, I suspect aftermarket support will continue even if Bambu stops.
Remember about this comment in 10 years
Ten years... Someone apparently thinks they're funny. I'd like to see their ten year old 3d printer that is still essentially using stock or equivalent components and hasn't been essentially re-engineered from the ground up. Are you enjoying manually leveling that bed with thumbscrews and a scrap of paper? Still printing on tape, or maybe a piece of glass? This whole hobby is still moving relatively quickly and I wouldn't be surprised to wind up working with additional axes or other unpredictable innovations ten years from now. Certainly we'll have gone through multiple "ultimate" build surfaces by then.
Just because something it's 10 years old doesn't mean it's useless or broken, especially when it's open hardware and you can upgrade it or repair it. Your mentality seem to be shaped around closed hardware that you throw away once it's broken or a new model is released.
Nope, you're missing the point entirely. There's absolutely nothing stopping me from walking into the other room, tearing apart my X1C and rebuilding it with, let's say a klipper board, except that it works quite well at the moment... No printer bought right now is likely to be any different in that respect. You're trying to act like it's an i-phone, but it just isn't.