this post was submitted on 22 Oct 2024
7 points (100.0% liked)
homelab
6602 readers
1 users here now
founded 4 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
My recommendation is to start with getting fax to work locally. As in, from port 1 of a single SPA2102 to port 2 of the same. This would validate that your fax machines and the SPA2102 is operational, and is just entertaining in its own right to have a dialtone that "calls" the other port.
Fortunately, Gravis from the Cathode Ray Dude YouTube channel has a writeup to do exactly that, and I've personally followed these steps on an SPA122 with success, although I was doing a silly phone project, not fax project. https://gekk.info/articles/ata-config.html
If you're lucky, perhaps fax will Just Work because your machines are very permissive with the signals they receive and can negotiate. If not, you might have to adjust the "fax optimizations" discussed here: https://gekk.info/articles/ata-dialup.html
And then once local faxing works, you can then try connecting two VoIP devices together over the network. This can be as simple as direct SIP using IP and port number, or can involve setting up a PBX that both devices register against.