this post was submitted on 20 Jan 2024
140 points (86.8% liked)

Linux

48331 readers
703 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago
MODERATORS
AgreeableLandscape@lemmy.ml
nooter692@lemmy.ml
MarcellusDrum@lemmy.ml
cypherpunks@lemmy.ml
cyclohexane@lemmy.ml
d3Xt3r@lemmy.nz
140
2024 Is the year I will commit to ditching windows (lemm.ee)
submitted 10 months ago* (last edited 10 months ago) by Hellmo_Luciferrari@lemm.ee to c/linux@lemmy.ml
49 comments fedilink hide all child comments
 

2024 will be the year I finally be the year I ditch windows.

I am not exactly new to linux, yet I am far from an expert. I made my journey over the years form trying Ubuntu (many many major revisions ago) and have found myself down the rabbit hole of going Arch. I run Arch with KDE on my laptop. I want to fully ditch Windows on my desktop, however I feel this will be a much bigger hurdle to overcome.

Build Specs: i7-12700KF Copper Modded EVGA RTX 3090 64gb of 3600mhz DDR4 ASUS Tuf Z690 Wifi D4

I could go into more detail about my specs, but the specs aren't what has made this journey a bit tougher. I use a Line 6 Helix and a Line 6 PowerCab 112+ and both have usb connections to my computer for integration with, you guessed it; windows or mac software only. Now I don't have a problem running wine, and a number of other solutions to run windows programs, I do however have a gap in knowledge in order to try to use these specific programs with specific USB peripherals.

Now, I am not sure if this is the best way, but I had heard the idea of USB passthrough. And I have no clue where to begin with that. Would this be the direction I should be going for programs such as those?

The only other software that I am going to struggle replacing is the RGB lighting software for all of my hardware. Most of it is corsair (Fans, RAM, Water Cooler, and plugins for the asus motherboard.) And my Steeleseries keyboard which uses GG.

I have looked into using OpenRGB but I was unable to figure out how to get those setup as it wasn't as plug and play as the manufacturer software, but understandably of course.

The absolute biggest hurdles is my Nvidia problem. I have always had issues with Nvidia on Arch. I would gladly take an suggestion. For reference, I would be using this mainly for my gaming. I occasionally dabble in Stable Diffusion.

I will be running Arch with KDE preferably, but every single time I have had issues.

I suppose any feedback anyone may have would be helpful.

Checklist of things I need to get working on in Arch, any help would be welcomed:

  • Helix Guitar pedal and PowerCab 112+ (USB Passthrough or any other alternatives people may suggest)
  • RGB for SteeleSeries Apex Pro (GG software on windows, open to alternatives)
  • RGB for Corsair (iQue on windows, open to alternatives)
  • Nvidia Drivers
top 49 comments
sorted by: hot top controversial new old
[–] lemmyvore@feddit.nl 18 points 10 months ago (1 children)

Use VirtualBox to make a Windows VM and you pick the USB devices from the menu to connect them on the fly, or you can configure the VM to pass them in by default.

[–] Hellmo_Luciferrari@lemm.ee 2 points 10 months ago

That might be the route I go.

[–] lemmyreader@lemmy.ml 12 points 10 months ago* (last edited 10 months ago) (1 children)

I believe that both VirtualBox and KVM (QEMU) can do USB passthrough. With either one you can have the full Windows OS running on your Linux desktop, which could be more comfortable than going for WINE. Here's an example with KVM and Arch Linux.

[–] Hellmo_Luciferrari@lemm.ee 3 points 10 months ago (2 children)

Thank you for the suggestion! I will look into this.

[–] Shdwdrgn@mander.xyz 3 points 10 months ago (1 children)

KVM has been my go-to for many years of running servers because it is extremely lightweight. Like for example, last year I finally ditched the old poweredge 860 servers (very early 2000's machines which topped out with a dual-core CPU and 8GB of memory), however from these servers I was running half a dozen virtual linux boxes handling websites and email. Of course running a Windows vm is going to take a lot more resources but any desktop computer that is less than a decade old would easily handle it while still managing your regular linux desktop.

One caveat about KVM, however, is that there's not really a great GUI interface for it. There IS a monitor to manage the VMs you have up and running, but I always launch new VMs from the command line, which is pretty much just a matter of setting the name and memory, pointing it to an existing image file or ISO, and then using the GUI monitor to launch a VNC remote connection to handle getting a new OS installed or make changes to an existing image to get it on the network. I don't consider this a burden, but then again I grew up on the command line.

[–] Hellmo_Luciferrari@lemm.ee 1 points 10 months ago (1 children)

I haven't explored KVM as an option. Yet, but I am going to be investigating that for my own use case now.

Outside of my laptop and desktop, I did run a Dell PowerEdge (forget the model, but I have a singular Xeon and 64gb of ram in it along with hardware based raid and 8 hdd bays.) that I ran Ubuntu on, but I realized Ubuntu wasn't the way to go for me due a number of things. So I shut the server down and will be reinstalling another OS on, I haven't decided yet but maybe Fedora for that. It was just being used to run Docker and Portainer, which I had a good chunk of docker containers running. I had a reverse proxy, Jellyfin, Gluetun, uptime kuma, signal messaging bot for uptime kuma to let me know if a services went down, photoprism, kanboard, a wiki, and a few other services.

[–] Shdwdrgn@mander.xyz 2 points 10 months ago (1 children)

I used to run Ubuntu on my servers but abandoned it because it was so unreliable. Things like a "security" update that completely broke the network card drivers, or another one that caused NFS connections to reboot the machine under a heavy load. I switched over to Debian at that point and have never had any problems in the past decade. Since so many people run Arch, I'm guessing it is similarly stable and will be a good choice for you (at least I think you said you were running it in your OP?). I'll have to look through those services you mentioned, I haven't heard of most of them.

[–] Hellmo_Luciferrari@lemm.ee 1 points 10 months ago

Well for my poweredge server I ran Ubuntu on it, and my pis Raspbian. As far as desktop/laptop I use Arch, not for stability though it has been stable for my use case but more so for a bleeding edge up to date experience.

As far as the services I ran, they were for media consumption, and some other network tools.

[–] Certainity45@lemmy.ml 2 points 10 months ago* (last edited 10 months ago) (1 children)

You can passthrough your Rtx 3090 into Qemu to achieve hardware acceleration. With software called 'Looking Glass' you'll get a hardware accelerated Qemu/kvm window instead of sacrificing your second monitor or using a kvm switch.

Level1Linux has made a brilliant videos about Looking Glass.

You should also passthrough a ssd/nvme disk into your Qemu.

[–] Hellmo_Luciferrari@lemm.ee 1 points 10 months ago

Thank you so much for the suggestionsm I absolutely will be investigating this.

[–] pineapplelover@lemm.ee 11 points 10 months ago (1 children)

Year of the Linux desktop LFG!

[–] Hellmo_Luciferrari@lemm.ee 8 points 10 months ago (1 children)

Been using Arch with KDE on my Lenovo Yoga, both Wayland and X11 depending 9n what I want to accomplish. Though it lead me down the rabbit hole of Weston so that I could run Waydroid from within X11. Ultimately I just decided Wayland basically when I am not using my touchpad or when I want to run Waydroid.

Year of the Linux desktop, LFG!

[–] pineapplelover@lemm.ee 8 points 10 months ago (1 children)

For some reason, when I switch to X11 (also on Arch with KDE), it bugs out, so I've been using Wayland with xwayland bridge installed.

[–] Hellmo_Luciferrari@lemm.ee 1 points 10 months ago

What was it doing for you when you switched back to x11?

[–] wesker@lemmy.sdf.org 10 points 10 months ago (2 children)

It's okay to dual-boot, or have independent systems. Just a suggestion, to consider.

I have 3 daily driven rigs. A MacBook for work, a Linux laptop for most things personal, and a Windows PC for gaming. Everything serves a purpose and specific use case.

[–] milkjug@lemmy.wildfyre.dev 3 points 10 months ago

A man after my own heart.

I had a whole bunch of machines and I just realised I haven’t booted Windows on any of them for a couple of weeks. I daily drive Tumbleweed when I don’t need any advanced Adobe features or play games that run on Windows only.

I wouldn’t go as far as to say I will ditch Windows completely, but it is nice to have options.

[–] Hellmo_Luciferrari@lemm.ee 3 points 10 months ago

Funny enough, last time I tried to do the whole 2 systems, I had Arch (with GRUB) on one nvme, and windows 11 on another nvme. At some point, all drives were unbootable. I am lucky I had my important data backed up, and on a separate drive anyways.

I had thought about it, but I really want to ditch anything windows.

[–] SirMaple_@lemmy.sirmaple.ca 8 points 10 months ago* (last edited 10 months ago) (4 children)

I feel that Nvidia drivers in Linux will always be a pain and it's straight up Nvidias fault.

I love the remarks Linus made about Nvidia.

https://www.youtube.com/watch?v=BcxKINWMD8M

[–] SuperIce@lemmy.world 4 points 10 months ago (1 children)

Hopefully the recent Nouveau work and NVK can allow us to just get rid of the need for the proprietary driver.

[–] Hellmo_Luciferrari@lemm.ee 3 points 10 months ago

One can only hope. That is the route I would prefer. But we shall see if it is practical for me!

[–] Hellmo_Luciferrari@lemm.ee 2 points 10 months ago

With Linux, Nvidia wasn't always bad as far as support goes. Now though, yes, I would agree this is an Nvidia issus for me.

[–] PipedLinkBot@feddit.rocks 2 points 10 months ago

Here is an alternative Piped link(s):

https://www.piped.video/watch?v=BcxKINWMD8M

Piped is a privacy-respecting open-source alternative frontend to YouTube.

I'm open-source; check me out at GitHub.

[–] GnomeComedy@beehaw.org 1 points 10 months ago

They were a pain 20 years ago and they're a pain now.

[–] ButWhatDoesItAllMean@sh.itjust.works 8 points 10 months ago (2 children)

Check out OpenRGB to see if it meets your lighting needs. I use it with Corsair Commander Pro, keyboard, mousepad, RAM, QL fans and the ASUS RGB header and attached lighting. It's been working great on OpenSUSE Tumbleweed for me.

[–] ScottE@sh.itjust.works 5 points 10 months ago (1 children)

Totally agree. OpenRGB works for me.

Granted, I just turn the "GeForce" light on the GPU off, along with all the other RGB stuff inside the case, but it works. 😁

[–] Hellmo_Luciferrari@lemm.ee 3 points 10 months ago

That's what I might end up doing. I don't care as much about the RGB on it as I do functionality. As long as they can go off, I have zero issue with that.

[–] Hellmo_Luciferrari@lemm.ee 3 points 10 months ago

OpenRGB seems to be consensus on how to handle this.

[–] phrogpilot73@lemmy.world 5 points 10 months ago (1 children)

For Corsair - I've been very happy with ckb-next. https://github.com/ckb-next/ckb-next

It is pretty robust, allows remapping of key/button bindings, changing of RGB, DPI, etc. Their goal is to replace iCUE. Very robust for mice and keyboards, but they also list other hardware that it is known to work with in their wiki. Might be worth a look.

[–] Hellmo_Luciferrari@lemm.ee 2 points 10 months ago

Thank you, I will chexk this out

[–] StorageB@lemmy.one 5 points 10 months ago (2 children)

I have to keep a Windows install around for the sole purpose of pushing firmware updates to my Headrush pedal board. The installer will run on Linux with Wine, but it cannot detect the pedalboard through the USB connection.

[–] ghassan@lemm.ee 5 points 10 months ago (1 children)

Try giving this a try. I found it suggested in the Arch wiki to update the bios. It's basically a bootable Windows environment from a USB. You can then try running your firmware updates through it. It worked to update my bios so I assume it should easily work with updating firmware for other devices.

[–] StorageB@lemmy.one 1 points 10 months ago

That's an interesting idea. I will give that a shot next time!

[–] utopiah@lemmy.ml 3 points 10 months ago (1 children)

I didn't try it (because I didn't have the need for it yet) but maybe https://wiki.winehq.org/Hardware#USB could help.

[–] StorageB@lemmy.one 1 points 10 months ago

I hadn't come across this when I was trying to get it to work with Wine. This looks promising - I'll give it a try next time!

[–] Sylver@lemmy.world 4 points 10 months ago (1 children)

I would wait for the cold months to pass. You’ll be paying more for heating, but if you play it right you can save on air conditioning this summer.

[–] Hellmo_Luciferrari@lemm.ee 1 points 10 months ago

Why do you say that? I already run this rig with windows, it's just a matter of ditching microsoft as a whole.

[–] kurumin@linux.community 4 points 10 months ago

!switch_to_linux@lemmy.ml

[–] gerdesj@lemmy.ml 4 points 10 months ago (1 children)

Use whatever you are comfortable with and works for you. At the moment it sounds like Windows might be the path of least resistance. Fine, go with that.

For me, I finally ditched Windows altogether around 15 years ago. Well, I say ditched - my customers and staff ... haven't.

The list of stuff you have problems with might be tricky on Linux simply because the vendors of music gear are unlikely to give a shit. Nvidia should be fine. I have a VMware VM at home which runs Zoneminder on Ubuntu, with a passed through Nvidia GPU. Surely it should be easier on physical hardware. I wrote this: https://wiki.zoneminder.com/GPU_passthrough_in_VMWare

You mention gaming so you'll probably not be bothered with CUDA. You'll need https://wiki.archlinux.org/title/NVIDIA If that doesn't do it for you, hit the Arch forums ...

The forums can be a bit intimidating but if you keep your query concise and show some evidence of effort, someone will probably get you over the line.

[–] Hellmo_Luciferrari@lemm.ee 2 points 10 months ago (1 children)

I definitely appreciate your response. I truly want to ditch windows, it would be easy without my music hardware though a VM with USB passthrough may be the ticket. The issues I had with Arch and my 3090 were really with trying to go the wayland route. Though that was over a year ago I gave that a shot. I could try again, but since then I have gotten more familiarized with running arch on other systems. I have tried many other distros, and none quite catch me quite like arch.

For my server I have already ditched windows, and went with a ubuntu server. Though I will be changing distros to something else due to differences in opinion with the way Ubuntu and Canonical conduct themselves. I would still rather see people use Ubuntu over windows, but that's not much of a bar to pass.

I may eventually check the forums if this time doesn't pan out with using arch on my main rig.

[–] gerdesj@lemmy.ml 1 points 10 months ago (1 children)

The logical replacement for Ubuntu is probably Debian. I have quite a lot of Ubuntu servers at work. I am quite seriously considering going upstream. I do like the LTS to LTS promise and that fits well for my customers who like to see enterprisey features without going RedHat or Oracle. You may not have had to deal with "enterprise grade" stuff which loosely translates to bloody expensive and often horrible.

I'm an Arch fan too - actually I'm a Linux fan. I used to do Gentoo (10+ years) but I got tired of my lap overheating. Before that Slackware, Mandrake (Mandriva), RH, Yggdrassil oh and a fair bit of SuSE, not to mention everything Novell did since NetWare 3.1. Whoops, sorry, mind wandering 8)

Wayland and Pipewire will probably do everything eventually but for now, you have functionality gaps. Pipewire is quite amazing and being developed at nearly indecent haste. It might be worth diving in to their community. At worst you will find a lot of like minded people to you.

[–] Hellmo_Luciferrari@lemm.ee 2 points 10 months ago

I haven't exactly decided on what distro for my server, but I have used forks/offshoots of debian, namely Raspbian or Raspberry Pi OS for my Pis. I understand the hurdles and such that come along with enterprise related products, as I am an IT professional by trade. I haven't worked with RHEL or Oracle's offerings yet.

I love Arch, but I too love linux. I never got into Gentoo, but I wanted to try it out just for the experience. I do get annoyed with having to compile everything from source with Arch on my laptop for exactly that reason; lap overheating. I also haven't used Slackware, Mandrak/Mandriva, Tggdrassil, or SuSE but I have at least heard of them. And I absolutely love the conversation, mind wandering is alright by me!

The tough pill to swallow with linux for me has been the functionality gaps between different offerings, but I love the choices I am given.

I appreciate your time in responding!

[–] Dexx1s@lemmy.world 4 points 10 months ago (2 children)

RGB for Corsair (iQue on windows, open to alternatives)

What I do with my Commander is to use the onboard lighting and fan curves. Set it up on a VM or when you still have Windows.

You can also look into Liquidctl

[–] Flaky@iusearchlinux.fyi 5 points 10 months ago (1 children)

If all you need is to control RGB, I've been satisfied with OpenRGB. OP is saying he's running Arch, and OpenRGB was quite recently moved from the AUR to the extra repos. The relevant package is openrgb.

[–] Hellmo_Luciferrari@lemm.ee 2 points 10 months ago

When I get Arch up and running I will be checking this out.

[–] Hellmo_Luciferrari@lemm.ee 2 points 10 months ago

I may do a VM as I have to find a way to utilize my specialized music gear. I do have to say thank you for pointing me in the direction of Liquidctl though, I want to consider that.

[–] woelkchen@lemmy.world 3 points 10 months ago* (last edited 10 months ago) (1 children)

The absolute biggest hurdles is my Nvidia problem. I have always had issues with Nvidia on Arch. I would gladly take an suggestion.

Ouch. Buy Radeon.

[–] Hellmo_Luciferrari@lemm.ee 1 points 10 months ago

Next time I build a PC I likely will just out of the necessity for consistent driver support in linux. Though AMD cards in windows have always given me lesser results.

[–] toastal@lemmy.ml 3 points 10 months ago (1 children)

Hopefully it’s all a relatively painless & bug-free experience for ya.

Does your gear work with Guitarix?

[–] Hellmo_Luciferrari@lemm.ee 2 points 10 months ago

U til you mentioned Guitarix I wasn't even familiar with that software. Unfortunately I don't believe there is any connectivity between PowerCab or my Helix with guitarix. But Guitarix could still be handy to me. Thank you!