Woodworking

6128 readers

55 users here now

A handmade home for woodworkers and admirers of woodworkers. Our community icon is a planter box made by @Captain Aggravated, the winner of our summer '24 woodworking contest. Congratulations!

founded 1 year ago

MODERATORS

NataliePortland@lemmy.ca

Making strong "Z legs" for a table (lemmy.world)

submitted 9 months ago by Swaziboy@lemmy.world to c/woodworking@lemmy.ca

9 comments fedilink hide all child comments

Hey WW community. Exactly as the title says - I am making some work tables for my kids. They'll be used for homework, laptops, etc. And they're kids, so one can guarantee a little bit of abuse.

They're designing them, and the "z leg" is all the rage apparently - I am in the process of designing these in sketchup, and wanted to get some input/ideas on how to make these really strong. I obviously cannot make them out of a single piece of wood, so there will be some joins, probably on the apex points. Oh and the designs currently require the apex points of the Z to be rounded ....

I'm considering using half-lap bridle joints, making the Z's angular, then routing the curves into them.

Input, advice, links to designs welcome!

you are viewing a single comment's thread
view the rest of the comments

[–] Swaziboy@lemmy.world 3 points 9 months ago (4 children)

Thanks for the input. To simplify we're going with straight edges (I think it'll look classier too) and I am going to put some dowels in for a bit of additional joinery strength. See pics attached for some drawings. Also I think technically this is just an angled bridle joint, not a half-lap bridle joint.

Now I have a further Q. And that is "how does one cut the inside of the outer(!!) bridle, on an angle to accurately match the taper?" (see the triangle with text labels on the drawing). The offset from horizontal is about 2.5 degrees due to the tapered nature of the horizontal legs.

[–] JustinTheGM@ttrpg.network 3 points 9 months ago (1 children)

You don't actually need to continue your taper through the bridle joint; just start your taper behind the joint.

[–] Swaziboy@lemmy.world 1 points 9 months ago

Yes, I reached a similar conclusion as well. Not sure if that makes it simpler or more complex. Time will tell!

load more comments (2 replies)